1. Product:

 

Alpine type X motor from a 12" driver. I have two other drivers in rough shape so if you want 2 or 3 we could work something out. 

 

2. Specs:

 

1000rms factory, I'm 1500rms should be fine with after market parts.  

 

Stock coil O.D.-80mm or 3.15" I.D. 75.5mm or 2.97" Measuring the gap was difficult with my shitty calipers. O.D.- 82.5mm or 3.25" I.D. -74mm or 2.91"

 

3 stacks, 15mm each or .6" 45mm total or 1.77"

 

Top plate height 10mm or .4"

 

Top plate to bottom plate is roughly 72mm or 2.83" 

 

Weight no boot -20lbs

 

3. Description/Condition:  

 

Used, decent shape. No shifts or major chips. Full length copper sleeve. Will come with boots. 

 

4. Price: :

 

50+ shipping. I don't really need anything as far as trades go. I've got plenty of highs amps and speakers. I got wire still. Only thing I need are blazer parts, dash bezel, door panels, dash speaker covers, front diff actuator. 

 

5. Pictures:

 

Bumples