Posted August 15, 201312 yr So this will be my second build log on this forum. I don't think I took as many pictures this time either. But here we go, here is what was originally in the car. Had this Fi BL for over 4 years now, I say its a 2008 model but I am not really for sure. Surround is messed up but the main thing, the coil is still clean. Box was given to me, tuning was ~40hz (eww) with sub installed. Had running on the RF-T1500bdCP I bought until I put in the truck, had it slamming though. ^^^^^^Yes I love 5-minute amp racks!!!! It's in the next pic too with a new paint job. LOL Then I broke out my Memphis MC 1.1100, was still slamming, just wasn't getting LOW, like I like because of the box, so you know what time it is. -------------------------------------------------------------------------------------------------------------------------------------------- Box building time. Specs are 6 cuft gross, 4.2 cuft net @ 33 hz. ^^^^^^Tool we came up with to mark a circle with, kept for future use too.
August 15, 201312 yr Author Then we installed and put the Memphis on the seat so it could see the sub laughing at it. LOL Got a little bit of sound deadener going in for under the rear seat to trunk area and the trunk lid. And yes, sorry I like AQ/SQ. Almost forgot BIG 3!!! I didn't take any pictures of the back because everything is under the trunk floor. Will do when I rebuild one more time for mids/highs. But the rear is done in the same wire as the front, KNU 1/0 Kollosus Flex, and I have a new neg batt terminal (CE Auto Electric Supply). Here are front pics. I solder all 1/0. Now for the new amp install and actual speaker wires for box. ^^^^^^^Everything ripped out. ^^^^^U know its bad when you have to go to the parts house for audio supplies because your crappy monopoly of a audio shop doesn't know why I would need a dozen at a time. I should have took a pic of the crap they gave me and charged $6 for. Got these for $5. ^^^^^Dropping sub in and getting wires right. New amp, well to me anyway picked this up off DEMO in the for sale section. Sky High Car Audio 1/0 for the amp. Test Fitting my amp rack and the amp. The Amp Rack I fabbed up, this one actually took 15 mins LOL. BAM!!! Clean as hell. Well to me it is. Let me know what you guys think.
August 16, 201312 yr Author Pretty decent and flat response but pounds 35 and below. Kinda sad to say the AQ didn't really surprise me with power output but then again my electrical isn't up to par for it in my mind.
August 16, 201312 yr box turned out looking good. what kind of vehicle by chance? im interested in measurements if possible ive got a sp4 15 in a lincoln mark 8 and my box is like yours height wise. made it as short as possibly and still had to kick and pull and force mine in
August 16, 201312 yr Nicee! Are you going to carpet/paint the box? Also since its facing forward, are you gonna seal it off?
August 16, 201312 yr Author Nicee! Are you going to carpet/paint the box? Also since its facing forward, are you gonna seal it off?Yes all will be done when I have the nads to seal it LOL. Any pointers?
August 16, 201312 yr Author box turned out looking good. what kind of vehicle by chance? im interested in measurements if possible ive got a sp4 15 in a lincoln mark 8 and my box is like yours height wise. made it as short as possibly and still had to kick and pull and force mine inDodge Charger 16"h x 32"w x 25"d
August 16, 201312 yr What I did was jus measure the distance from the box to the side and then up. Cut a wood to that measurements and if it curves on the top like mine then take your piece you cut and hold it up next to the box and use a pencil to trace the curve.I don't know if that make sense, but if it doesn't I can take a buch of pics showing you what I mean!
August 17, 201312 yr Author What I did was jus measure the distance from the box to the side and then up. Cut a wood to that measurements and if it curves on the top like mine then take your piece you cut and hold it up next to the box and use a pencil to trace the curve.I don't know if that make sense, but if it doesn't I can take a buch of pics showing you what I mean!Yes I would like an example to look at.
August 18, 201312 yr Author Can't say because the 1500 was used when sub was in different box.However, now in my truck on a 12" fi BL @ 31 hz it does seem to be louder. And I hate to say that because those systems are not very similar.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.