Posted February 13, 201411 yr Hello, this weekend I hope to construct a center console for my truck. The vehicle is a 99 ram 1500 quad cabThe box will take place of the center bottom seat cushion, allowing the top flip up portion to still be utilized as storage.The box will house 2 FI Q10 D2 subs with everything but high qts optionThe box dimensions are H:10" W:15" L:30"Box material will be 1/2 birch ply home depot project panelsBox gross volume is 2.11Port will be precision port dimpled inner + outer flare 4" diameter 24 inches long for a net volume of 1.67 cuft and port tuning frequency of 27.43Hz according to torres. Box will have flame kissed woodgrain with a very dark cherry stain and shalaq for a beautiful finish that matches the dash bezel. Does this seem like a reasonable setup? Any input is welcomed thank you
February 13, 201411 yr Author Will do just picked up some 23/32 auraco today, it matched the woodgrain better and had virtually no voids
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.