Posted August 5, 201411 yr Hello, I have 3x SSA DCON's in a box that I handmade from a design from a member here. I recently bought a new SUV and the box will not fit. The box is too wide by 1 inch. The inside area of the port now is 14 3/8" X 7 1/2" ....if I cut 1 inch off of the port then the new port would be 14 3/8" X 6 1/2". Would this change the sound of the subs a lot or would it be ok to do this ?Thanks in advance for any help.
August 5, 201411 yr Author if you need to take an inch off, the port is the worse section to cut. Ok. Thanks. I will cut off of the other side and see how it sounds. I may end up replacing the subs with 2 18's but this is a quick and cheap fix for now. Thanks again.
August 5, 201411 yr is the port L shaped? if it doesn't wrap all the way around to the other side of the box it might be ok.
August 5, 201411 yr More specs and details on the box would help us tell you exactly what will happen
August 6, 201411 yr Author More specs and details on the box would help us tell you exactly what will happenHere is the link to the thread with my exact box design. http://www.soundsolutionsaudio.com/forum/topic/57667-box-design-3x-ssa-dcon-12s/?hl=%2Bdcon+%2B12%26%2339%3Bs Hope this helps. Thanks
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.