Posted May 20, 20178 yr Hello all, I am wiring up two 1ohm DVC 12" subwoofers. I am putting both subwoofers in a sealed box, each of them has their own compartment and terminal. I am running a Sundown SAZ-1500D and want to wire it at 1ohm so I get ~750 to each sub. I want to double check to make sure the sub is wired correctly. I found the following diagram. Two 1ohm DVC Wiring Following the diagram, I ran one piece of wire from one positive to the negative on the other side of the sub. I then connect the terminal wires to the other neg/pos on the subs. I also do this for the other sub. Then from both terminals, I run their own wire to the Sundown which has space for two pos/neg inputs (it is internally bridged). Did I do this correctly? Edited May 20, 20178 yr by leon
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.