Posted April 7, 200718 yr http://forum.realmofexcursion.com/showthread.php?t=23802Just saw these.FRIGGEN COOL!I may just have to get a circular saw for my BTL box.
April 7, 200718 yr I don't see the point.Looks, I guess. Doesn't look all that good to me either.http://fullrangedriver.com/gallery/display...um=4&pos=68How to do curves right
April 7, 200718 yr Author Only flaring one wide would still be 50% better than not flaring either.You can alse bend the inside wall, so there would be much less turbulance at the inside corner (of an "L" port) than there would be otherwise. Add something to the opposite corner and it's a completely bent (radiused) port.
April 7, 200718 yr but that port isn't even flared 50%....more like 35%. he's only flaring one side of a four sided object, and that's not counting the rear of the port inside the box.. i don't see where there is really any gain at all, and flaring it like that on one side looks dorky.the center console was kinda neat though....wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
April 7, 200718 yr But those boxes that take "an advanced engineering degree to design" actually have some acoustic benefit of some kind
April 7, 200718 yr I don't see the point in flaring a slot vent anyways. Unless it is necessary to make the vent so small for tuning purposes that you don't get the necessary vent area, the turbulence will be well within range for vent mach. Even in an SPL setup you are gaining minimal amount, if any. It will only help in that instance. It does look different, that's for sure.
April 8, 200718 yr The increase in cross sectional area will have a diffusing effect, even though it is only on one side. It will improve flow and reduce port speed at the exit point which can help out a lot in the realm of port noise. Say the port is 3" wide and the single sided flare is a 3" radius. You've doubled cross sectional area and halved velocity at the mouth of the port. Same priciple as a full flare on a round port. You do have to account for the volume of air in the flare though.
April 8, 200718 yr I don't see the point.Looks, I guess. Doesn't look all that good to me either.http://fullrangedriver.com/gallery/display...um=4&pos=68How to do curves right Neat stuff there!http://fullrangedriver.com/gallery/albums/...-2nd%20Pair.JPG
April 9, 200718 yr I don't see the point.Looks, I guess. Doesn't look all that good to me either.http://fullrangedriver.com/gallery/display...um=4&pos=68How to do curves right Neat stuff there!http://fullrangedriver.com/gallery/albums/...-2nd%20Pair.JPGthe things i would give up/ do for that cnc router!! wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
April 9, 200718 yr Thats a small table...I run a 5x10 for a sign company.While i have cut box pieces on the table, I had never thought about stacking like that dude did..Looks like i'm gonna be doing a lot of reading and math today...
April 9, 200718 yr lol..man i wish we had a cnc router when i worked for a sign company. if we did "routed" aluminum faces, we cut it out by jigsaw. my current employer, stereo shop, is considering sear's small cnc router for doing trim pieces and such.i, too, am wanting to do a laminated enclosure. but i don't have a router table, lol. it'll be all hand routered.wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
April 9, 200718 yr We aren't a small compay...... henrysignsystems.comi hand to talk my bosses out of getting another tableif you were closer we could probably work something out...laminated and cut by hand is a lot of work, but would be worth itwhat i love the most is we keep 3/4" HDF around to make molds for panformed facesnow if i just had the time and $..... Edited April 9, 200718 yr by weasle421
April 9, 200718 yr we used 2x4s and 1/8" masonite for our molds. i used to work for coast to coast sign company. there was a few times we used 3/4" or 1" hdf for faces, but mostly it was the 2x4/masonite combo. i miss the 10' chain arm saw(like a real big radial arm saw, only it was pulled by a chain attached to a crank). lol, cut rip a sheet of wood in half in about 2 seconds, lol.wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.