i need to know the mounting depth of both, as well as mounting diameter and overall outside diameter. i looked at the SI website and can't find it. i've also used our search feature to no avail.

thanks ahead of time. oh, and sub displacement would be nice too.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

I'd help ya out, but mine are at my new house and I'm not there. I know Nick has poster this before, but our search function leaves a lot to be desired.

Kent, PM Jacob, he can tell you.

Yeah, PM the guy and make sure you post the answer on here. I'd like to know as well.

Kent, PM Jacob, he can tell you.

will do.

and our search function sucks, lol. i made sure to try that first as i was pretty sure nick had indeed posted those specs before. but sure enough, not a damn thing came up.

thanks sir!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Info might have been lost in the the "hiccup."

pm'd jacob..waiting on the return, lol..

and i bet your right ryan1...on the hiccup that is.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no reply from jacob. anyone help me out here? i've got a gentleman wanting a box built/designed and i can't complete that without those dimensions.......

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

no reply from jacob. anyone help me out here? i've got a gentleman wanting a box built/designed and i can't complete that without those dimensions.......

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, call this number and leave a message. Nick should get back to you shortly, if he doesn't let me know.

no reply from jacob. anyone help me out here? i've got a gentleman wanting a box built/designed and i can't complete that without those dimensions.......

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Kent, call this number and leave a message. Nick should get back to you shortly, if he doesn't let me know.

i don't see a number....lol.

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

(704) 996-0850

thank you sir..

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Woops... I guess it got lost in my to-do pile. The cut-out on the 12" model is the same as the Mag 12" at 11.125 inches and the 10" BM has the same cut-out as any other 10" 12-spoke driver out there at 9.25 inches.

As for depth... haven't measured that, let me see if I can get that.

I recall myself asking this question earlier.

Sadly the info was deleted

10" BM is 5 3/8" deep

12" BM is 6" deep

many thanks mr sundownz!!!

now on to the planning stages!!

wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

What would be the sub displacment for the 10"?

.10 cu.ft.