PHATBOi

Didn't want a long skinny port across the bottom and didn't have the width to do a center or side port so this is what I came up with. May end up shrinking it. Have to wait for the subs to break in and see. Really lacking on the low end right now. Plays it fine and the subs are moving good, but there's just no authority behind it. May try to block off the open area, where my batts are, under the box in the back. Think maybe it could be losing it there also.

Thanks. Yeah, probably bed liner. It'll get done before Slamfest in September.

What do you mean?

Brace: Wires:

Box: 13^3 @ 30Hz with 168 sqin of port @ 13 sqin per cube

Don't know if they changed at all when they made the switch to SQ, but I'm running an AQ2200 and it's a beast. .5 daily with no issues and it packs a punch for such a small footprint. Great amps.

Nice build. Tuned in.

18 for sure.

Yeah, a guy here in Tampa has 4 Judge 15's in a 4th on 2 NS-1's. They take the power fine.

Yeah, it threw me off too. I actually hooked them up your way and couldn't figure out what the hell I did wrong, lol.

I'm pretty sure the rear RCA's become the high out and the front RCA's become the mid out and I think the speaker outputs do the same.

Sweet build bro!! I want to wall, but have never had the room to. 3 kids and one car = no wall, lol.

And I assume you mean get a set of tweets that can be crossed lower?

Should the crossover points overlap? Like instead of having the mids lowpassed at 5 and the highs highpassed at 5, should the mids maybe overlap into the highs, like 6.3??

http://www.ovnilab.com/articles/eqtypes.shtml

Point taken. Don't mean to thread jack but any suggestions on my crossover points M5? As of now I have my FT1's at 5K and up, Skar FSX-8's at 100-5K, and my subs 100 down to 20 (box is tuned to 28). All are at 24DB slope.

your assumption is terribly wrong. Para lets youbadjust the q which determine the"width" of the eq'd band He had it correct in laymen's terms.

Yeah, just HPF for front and rear and then a LPF for the sub. Yes, the preamp is affected by the processing when in Network Mode, although there is an option to shut the preamp off if you aren't using it. It's under the setup menu that can be accessed by holding the knob in while the unit is off. And you are also correct about the difference between the parametric and graphic eq.

Absolutely love mine. First experience going fully active and the 80prs made getting the crossover points all setup very easy. Still struggling a little with the 16 band EQ (wouldn't dream of trying to EQ L/R separately, lol) but I'm getting the hang of it. I tried the Auto EQ and didn't care for it personally. I'm not into the TA and all that. Just not my preference. But as far as going active from the head unit and having 16 bands of EQ to tune on the fly, the 80prs is where it's at! Wouldn't trade this head unit for the world.

New update coming next week!! Someone is about to get a little louder...

Retuned gains and EQ. Also adjusted the crossover points a little. Sub is 20-100, mids are 100-6.3k, tweets are 6.3k and up, all on a 24DB slope. Backed all the gains down a little and while I lost a little output, it sounds so much cleaner. The AQ220D seems to be much happier as well. Please leave the Skar bashing for another thread. I know how everyone on this forum feels about the brand, but for the low price, these new line of mids have really impressed me. Taking over double RMS daily and are louder and clearer with the same amount of power than the Lanzar OPTI8's were.

Thanks guys! I'll get a vid up of the subs soon. I have a quick one from the night I got the AQ hooked up, but it's not a very good one.

I love it! Packs a punch for such a small footprint. Wanting an AQ200.2 now to match, lol.