Jump to content

triggergun

New Members
  • Content Count

    8
  • Joined

  • Last visited

Community Reputation

0 Neutral

About triggergun

  • Rank
    Newbie
  1. triggergun

    rlp 15's finally installed PICS!!!

    144 sq inches of port 18.75" in length I dont have a video camera or I would. I do have a digi cam that can shoot like 18 seconds of video...I could try that.. kinda short though.
  2. triggergun

    rlp 15's finally installed PICS!!!

    Each sub sees 800 watts RMS. While each sub sees 3.2 ft^ Tuned to 32 hz.
  3. I posted a topic on box suggestions a few months back. Well, it is finally done! Very impressed with soundsplinter!!!!! pics are here: PICS
  4. triggergun

    4 RLP 15's

    The box is actually "L" shaped. It will be a wall and a portion of the box will be in the bed.
  5. triggergun

    4 RLP 15's

    It is completely un-called for! But it should feel good!
  6. triggergun

    4 RLP 15's

    http://www.cardomain.com/ride/661517/3 As you can see its a struggle to get these 4 in... I WISH I could have done 6!!!!!!
  7. triggergun

    4 RLP 15's

    thanks guys! That is what I was needing to know!
  8. triggergun

    4 RLP 15's

    I just recently purchased 4 RLP 15's. This is my first SoundSplinter purchase. I bought the dual 4 ohm version. I have a enclosure built that is 13.14 cubic feet NET volume.All 4 subs share the same 13.14 cubic foot chamber. The port is 6x 24 with a length of 18" tuning it to roughly 31.5 hz. These will be fed by a hifonics colossus. My options are to give each sub 750 watts each or 600 watts each. With each sub seeing 3.2 feet will I be over powering them?? Any suggestions would be helpful. I can easily slug the box if needed. Also, any thoughts on all 4 subs all sharing the same air space? This is for a LSQ daily driver with a emphasis on lower octaves. "I mainly listen to bass cd's and rap" Thanks!!!!!
×