pitbull239

Hey guys.. I have an 07 escalade with 32 inch rims on it. I want to put air bags on it. Does anybody know of a good kit to buy?

hey guyz... I thinking of painting my car a chameleon design. Now I know that the car has to be sanded down and primered and painted a first coat of black. This company is selling the paint to me by the gallons. They said it comes with the chameleon base coat and two other clear coats and some other things already mixed. It sounds like its ready to spray out of a gun. Is that base coat of the chameleon paint all I need for the actual paint? how many gallons do you think its gonna take to paint my full car? its a cadillac cts

Hey guyz.. Does anyone know of somebody that does good door panels around the san antonio area or somewhere near by?

Can I get ur guys info from san marcos?

If you have a two channel amp and only use 1 channel for now, would all of the amps power from both channels go through that one channel being used or would it stay the same as what it is supposed to put out per channel?

hey guyz.. If I have 4 super tweeters that are 8ohm each and want to wire them to 2 ohm, once I wire them together and got my positive and negative, Would I only need one crossover or will a crossover be needed for ech one still?

when hooking up mulitiple amps would you run just 1 strand of remote wire to the first amp and then cut a second strand and connect both amps with the 2nd peice of remote wire? or would you run separate strands from the headunit to every amp?

if you have 2 mono amps and you strap them are u getting double the power to that one channel on the master amp? Does it effect ur ohm load to the master amp from ur subs? like if you wire ur subs together to get 1 ohm would you still get 1 ohm power from the master even if it was strapped? thanks

jbl gti mk2's 15's so i would get a 3 ohm load strapping them and it would be the same as wiring individual to 3 ohm ?

yeah they have master and slave switches as well

power acoustik 6000d's. there new . they are 3500 watt stable at 1 ohm. but my speakers are dual 6 so they will only go down to 1.5 together. what if there strapped would i still get 1.5 power or 3?

hey guys.... Can u hook up 8 sets of components to 1 mono amp? something that has as many watts as u need? if so how would u do it, just twist up all the wires and stick them in the slots or how would you do it? Tryna get away from having 2 amps for mids and highs. if not give me some suggests. thanks

I have 2 4 channels right now running. one to each door. to many wires in my truck so i just want to clean it up with wiring just one amp. starting to have alot of maitnence issues with the both of them. just want to make it more simple with rca's and wires

hey guys... I have 2 1000.4 's going to my front doors . they have been sounding great, nice and clear and no distortion. I have been having some ground problems lately and had to drill a new ground. After that they were back to sounding clear and crisp. Now about a week later all the static and distortion came back to the point were I almost cnt even hear the music. I checked the ground and the ground is good. i checked the rca'a and there fine. ( I do have a few splits on my rca's and those were fine as well). I was told by someone who works at a car place that it could be the deck because it only gives out so much amp or power roughly 2 volts or 2.5 and he was saying that amps usually 1.5 by them self and Im running 2. so bottom line he was saying that i Need to daisy chain these amps so that the deck can just give power to the one so it would stop putting all that noise in my speakers. IS THIS RIGHT? if so how do you daisy chain amps? Or if you know a solution please write back, thanks. my deck by the way is a pioneer 4200dvd

thanks for replying, 2 1000.4 's crescendo's. the amps are grounded to the body of my truck. 400 rms to each door roughly. wired components 4 sets. no big three, was gonna wait till i get my H.O alt.

thanks for replying . I put the ground in 2 different spots already and wire brushed the paint off and then drilled in to the chassie of the truck with a screw and the connectors i needed. Im stuck dnt know what to do. My have split rca's , no cut in them at all just split connector rca's, thanks

hey guyz.. having a little problem with my 4200 avh pioneer. I pulled it out doing some little maitnence and then when i put the wire plug to the back of the deck and started it it wouldnt turn on. I drive a 06 escalade and i have to use a wire harness with a interface on it. so what i did was make sure nothing grounded and re connected the power ground and constant yellow and still nothing. then when i unplugged the interface and plugged back in it turned on for about 5 seconds and then shut off again. Could this be a bad interface? or what could it be? please help. thanks

yeah they all work. Im leaning more towards an interface problem. its just one of those cheaps ones from walmart, ones of those schoses brand name. i need that gmos 4 , from gm. it kinda was giving me problems before by keeping my stereo on while my car was shut off and things like that because my stereo wnt come on without the interface. would do u think?

hey guyz.. need a little help here. I just installed visor tv's in my ride and i ran everything correctly I twisted both powers together and then the grounds for both and then hooked them to the back of my pioneer 4200 with the correct wires. the tv's have 2 rca's that come with them both and they are yellow meaning video in on both. so i hooked my rca's to the back of the pioneer 4200 in thevideo out slot. when i tried using them i put in a movie because my deck plays movies and the tv's turn and work but say the have no signal on eith video input. what do you think this problem could be. I first thought it was maybe the grounds because i hooked them up to the ground in back of the deck but hat shouldnt matter, i re wired them and still the same thing. can anybody help thanks?

yes i did . could that be a problem?

there was a av input and an aux input in the menu but i turned them both on and still nothing. anything else?

hey guys.. I just wanted to know how to wire up screens to the deck from headrest, visor, ceiling etc... I wnt to know where the rca'a and wires go from the screen and what they need to be hooked up to in order to work. i like doing things myself can anybody help and explain fully? thanks

cool. thanks every body

but were am i running them to? the back of the double din video/ cd player?

yeah all of them. the ones that run from the screen?