BTL15

Hey guys it's been a while since I've last been on here, but since then I've decided to see if I could could sell my system. I have a friend interested and he wants to know a price. I told him I would think about it and get back with him. Now my question for you guys is what would you consider a reasonable selling price for my system. I only ask because, when it comes to selling I always tend to throw out number far too high so I figured you guys would be my second opinion. If you don't know what I have it's a 15" Fi BTL UFO slug D1, along with a Crescendo 3KWP, and my KNU Konceptz Kollosus 1/0 20'. Since I didn't have the electrical to run it to .5 It's only seen 2 ohms. The sub is in mint condition along with the amp. I was thinking $700 do you guys think this is a fine asking price? Any help would be appreciated

Bump for more opinions

It's called Spatter Paint not splatter and I its made by dupli-color. I bought it from my local advance auto. I posted the video that I was talking about where EXO used it and gave me the idea below. I did exactly what he did and thought it looked great, I will clear coat mine next time I do it to protect it from chipping and flaking.

Hey guys it's spring break so it's time to start working on my truck again. For those that do not know I drive a 1999 Dodge Ram 1500 Ext. Cab 5.9L Laramie SLT. It may be old but it's only got 45K miles on it. Anyway I plan on removing everything and rebuilding from the ground up. I will be using the same equipment and box, but I will make everything neater and more professional. Over this weeks break I plan on repainting my box, carpeting my amp rack and rear seat combo, installing SDS CLD Tiles, Plasti dipping all chrome and silver parts, along with either an exhaust install or new headlights and hids (or both). Along with these upgrades and installs I plan on adding plenty of additional add-ons to this setup over the next few months. Lets begin with the original picture of the truck (this is just a pic. from online, but is the exact same truck as mine rims and all) The first thing I did was strip down all things inside of the truck to prepare the metal to be cleaned and covered in SDS CLD Tiles. All doors are exact reverse replicas so there is no need to show both sides. Front doors Back Doors Floor Back Wall Roof Pictures will be posted when I have the time to upload them so they may be a few days late.

Ok so it's time for some more updates. From where I last posted I've finished all plasti dipping along with the install of my new exhaust and I couldn't be happier with everything. If tomorrow is warm I will remove the box and repaint with the same paint as before ( Spatter Paint). Unfortunately I don't think I will have the time to carpet the amp rack/ seat, hopefully I can have this done soon though. Anyway lets get to the pictures. I had a little extra plasti dip so i decided to do the wheel wells also and they look amazing.

Idk it's been a while since I painted it, but I will be repainting it again so I will be able to let you know probably sometime tomorrow when I go and buy some more cans of it. I remember it was something from Advance Auto and I got the idea from exocontralto on youtube when he used it for one of his old builds.

Alright guys so it's time to post some more pictures. Heres some of the front and rear bumper along with the rims plasti dipped. I could have finished everything,but it began getting too cold and the spray was getting thick so i'll just finish the rest tomorrow. I gotta say this stuff is pretty nice; I love how if I don't like it I can just peel it right off. So far I'm loving the matte black look to it and VERY excited to see it when completely finished. I completely forgot to take initial pictures, but luckily for me my mom is a picture nazi so I have some that she took.

I love your cheap wooden circle guide. I might have to use that for my next build. What bit did you use to cut the circle?

And here's a few pictures with everything but the seats back in place.

Alright so I finally got the time to sit down and upload the pictures here. Just from tapping on the outer panels, I must say I'm impressed by how much of a difference so little makes. Just from putting down one tile I noticed a HUGE difference in sound. Now onto the pics.

Just a few more pictures I sent to Don at SDS and asked him to label where I should place each tile. Great fast response and I love how he wants the best for everyone by providing excellent services and products. Back to the pictures. All photos are edited by Don to show future CLD Tiles locations. Front Door Floor Back Wall Roof

So what are the other wires for? When i rerun the wires to the new sub i would like to mount the amp to the new box which would require me to cut all wires, and i just wanted to make sure none of them would be important.

Hi my roomate has a sony stereo system and were looking to take the built-in amp and have it power a 12". When we took the cover off of his amp we saw what is shown in the picture attached. My question is which wires when cut need to be ran to the sub? I will put connectors on the wires so if he ever wants to wire it back up he can. Thanks for any help

No i didn't take out the sub, but i can tell you the sub has a on/off switch and a min-max knob so im guessing it has something to do with either of them.

I dont think it's too bad. I go in donate, get paid, and get out.

Hey guys I just found out earlier today that I won a free 26" Samsung LED TV. I donate plasma at a local donation center and they pay me per visit, and about 2-3 times a week they pick a random person to win a prize and my name was drawn. I can't believe I won and the funny thing is that i told them that I would win that tv. Anyways just wanted to share my story. BTW if interested the tv in for sale in the classifieds section.

BUMP for some opinions

Hey guys i'm in the market for a pair of new headlights/bulbs and was wondering what you guys thought about the headlights below? I was wondering if these would work with HID's? I'm looking at getting xentec hid's, my roomate has them and they look amazing for $32. These will be going on my 1999 dodge ram 1500 ext. cab. Please post what you think about these. All opinions would be appreciated. http://www.ebay.com/...984.m1423.l2649

Hey guys It's time for a new box and while I was looking around I came across PWK Designs. Has anyone dealt with this guy yet? Looking at his youtube videos and his official site it looks like he takes everything into account. If anyone has had a box designed by him let me know what you thought about his services and was it worth it?

All I want is a flatter response from my sub, which is why I was going towards the 6th order bandpass.

The only reason I ask for PWK Designs is because it seems as if he models everything and sees which design fits your wants best for your car or in my case my truck. I currently have a ported, but I know it could be better. I guess my question is would having him model everything to find the best design really be worth it? He seems as if he knows what he's doing and the only reason I came across him is because I wanted a 6th order bandpass, and RAM told me about this guy so i figured if RAM recommends him he can't be too bad. Right?

The education is getting better? that must be why the partying has started to go downhill. LOL. Well except for the dumb kids who go there only to party and blow their parents, yes it's actually improved quite a bit. Too bad they keep raising the tuition every year because more and more students are coming in. They have about 30,000 students now, which is rivaling ncsu. And the partying has gone downhill. I can't deny that, theres just too much violence and the damn cops would rather be out there busting parties and arresting college students then stopping all of these robberies and shootings (and stabbings).

I lived in Greenville for 5-6 years. My roommates went to ECU. I still go party from time to time. It's a good place to party haha. Too bad thats the only thing it's known for along with medical school, while its engineering program is amazing and getting better every year, but still unrecognized by a lot.

I didn't know we had that many NC people up here. I go to ECU maybe we can all meet up one day and showoffs our equipment and rides haha.

I'm actually in the same boat. I would love to make a living off of audio and custom fabrication but unfortunately the income will most likely never satisfy my desires to buy everything I see haha. Instead I'm currently attending college to become a mechanical engineer and if I wish to further pursue the audio lifestyle I will also try to get my electric engineering degree giving me the best of both worlds. With this I would hope to get a decent paying job and MAYBE open my own store one day. Sorry to thread jack and I know I'm ranting on about my life, but maybe this could be something that would interest you and still give you the option of success even if the whole business thing fails.