mrbojang
-
Content Count
483 -
Joined
-
Last visited
-
Days Won
1
Posts posted by mrbojang
-
-
Looks great!
Doesn't render properly on my iphone though...
0 -
So I was looking at a tahoe build log on here and saw this:
I've also seen alot of setups where people run speakers in the center console area...
Isn't this bad for imaging?
0 -
I wonder why db-r won't, did you call them?
I believe he doesn't work on any amps that put out more than 5k.
0 -
I'm in Delray Beach but don't have any of those subs.
There's two shows coming up in our area...
One is in Jupiter on Halloween and the other is November 7th in Lake Worth.
0 -
-
old pic
Clean man.
0 -
Can you try putting it in park at a red light (taking your foot off the brake) and see if the voltage goes up?
0 -
As the topic says, let's see those dashes.
Here's mine at night. I just relocated my bass knob to the left. I need to tint the volt meter.
0 -
Okay Im really interested in buying a 7KD but I have a question. First off a 1/0 gauge cable can only support 300-350 amps of draw yet your amps is pulling almost 800 with a load?
I believe bus bars are recommended and using actual copper pipe to the amps.
0 -
This topic was doing so good until the PSI part.
Why is that, I was thinking of using in my next build? Pm me if you want to keep it private.
Not worth me getting into.
Everyone is avoiding getting into it.
Hove, looking good so far!
0 -
I'm curious as to what difference I should except to see switching amps.
Currently I have some shitty old soundstream amp, MAYBE giving my SSD 18" 300w. I'm not even sure on that.
I'm going to be switching it out for a SAE-1000d. What kind of output difference should I be expecting ? I'm sure overall sound quality will be better, as my current amp is garbage.... But will there be more SPL ? That's what I'm curious about.
Over 9000!!!
Seriously though, hard to say. You're more than doubling the power so you SHOULD get some gains and have an audible difference. Only way to know for sure is to try it out and see.
0 -
SWEET! I don't really understand the purpose of dividing up the BTL line though...
Looking forward to seeing prices and pictures.
0 -
haha.
0 -
-
I always like to go over the terminal, just creates a cleaner look!
Yeah that's what I meant, trying to figure out what size I need to fit over the terminal..
0 -
Should fit over the terminals also? Or what size should I be purchasing?
Thanks.
0 -
Bump for feedback
Downloaded it just now and listened to it on my headphones. Sounds good enough for me to burn to a CD and try it out in my truck later. Also, my setup peaks around 43hz so thanks for not going low with it.
0 -
Saw this online randomly somewhere. I love the light.
0 -
Nice score man. It sucks the nightshades are out of stock...
Any pics of the install?
0 -
Just wondering when this is required? When your batteries rest at a low voltage or?
0 -
Pretty violent\disturbing but I just came across this:
http://www.worldstarhiphop.com/videos/video.php?v=wshhdysSmiamXw3onFgL&ref=nf
Pretty messed up if you ask me.
0 -
damn.
0 -
I have a second saz-3500d coming tomorrow.Waste of money in my opinion. Unless you are upgrading.
I'll be running different drivers later. Most likely two 18's.
0 -
So currently I have my six sa-10's wired up to a saz-3500d @ 1.33ohms and I'm hoping to get more out of this setup. I have a second saz-3500d coming tomorrow.
I'm thinking I'll bridge the two amps after upgrading my electrical (acouple d3100's). I'm curious if you guys think this approach is sane or if you think the subs are going to smoke from the extra juice.
I realize this is most likely one of those near impossible to answer questions that gets asked here all too often.
Also, subs are turned to 32hz with 1.3cf each.
Thanks.
0
There's a first for everything...
in General Audio
Posted
This thread is full of win.