cvame

Copy, ill try the speaker mounting reinforcement. And pull the isolators.... I haven't because there is a buzzing noise without them. A buddy said to run the rca with some insulation through the dash to keep the power away from them... BTW I did replace the infinity 4 channel with a fosgate power 4 channel....no real noticeable difference at all.

lol, dont think the link to page 2 was needed, but thanks. I'm just saying, before the OP starts adding more midbass drivers, I think revisiting the install could easily fix the problem completely. Hes got the power & the gear to have decent mid bass, there is no reason to need more drivers. I read through every page (quickly I might add) and I saw a ton of great information but nothing stressing the importance of install. Who is to say that if the OP added more midbass drivers with similar install (no offense man) the issue would not still remain? I know its hard to really be sure of the advice given here on how to help someone when you cant be there to hear the system os see it for your self. Kinda like if someone asked me medical advice on here with out actually seeing the patient... I have Fosgate Power T1652-S's in all 4 corners of a crew cab pick up. I have them in the stock locations. I have not deadened anywhere yet. I dont have the mid bass im looking for, so i had to turn the crossover on my subs to 250Hz in order to fill that void. Thats pretty much the readers digest version - Impious and many others here have explained the techniques of todays stereo to an old schooler like me lol. I appreciate any and all viewpoints. I havent boughten any midbass drivers as of yet, because everybody is trying to make sure ive gotten these components set up right. Audiophyle, if you have any ideas please lemme know, im open to any suggestions because im sure i dont have these high dollar components set up to thier fullest potential...

Hopfully i'll be getting to the install part soon. I've learned alot from the members here, read countless threads on same subject. Im also researching moving the mids to the kicks, or sealed door panel pod with the 8" midbass driver, or IB in the door for either of those... Im doing as much research as possible to buy and install it once so i dont have to keep changing it around.

Thank you Impious, I'm still thinking of a creative way to fit a sundown amp in there. If I do go with the anarchys, they are 8ohm correct? If the amp only shows 4ohm rms Watts, what is the expected power when running 8ohm speakers?

What would removing the ground loop isolators do? Are they possibly flitering out some of the sound frequencies I've been looking for?

impious, what about the HiFonics ZXi40.4? Is the band pass on that amp suitable for midrange frequencies?

I wouldnt think so either... Impious, what else do you think i would be able to use as an effective bandpass? Ive looked at the sundown audio 100.4 amp (many times) the only problem is that its too long, at 19", it wont fit under my seat. Otherwise it would be perfect for midbass. Ive looked at the Fosgate 3sixty, but that's $500 alone. I was considering just setting the amp for the midbass drivers on low-pass at 250Hz and just letting it roll off at the lower end? While my subs will be set at 60Hz...

It has the 3 "hi-all-low" choices and the adjustable.crossover...

I believe the only thing my current deck (JVC KW-XG700) close to a lopass output is the sub RCA. The amp had both a hi or low setting. Would this work or would the sub channel be too low?

That would be a looong story LOL. Besides this is your thread sandt8, I don't wanna hijack it. Impious is walking me through a midbass set up on my thread. I'm looking for some strong midbass drivers that have good output and ive heard about anarchy, but never heard them personally.

Yes. That's how Sundown's multi-channel amplifiers have bandpass capabilities; the lowpass crossover and bandpass filter are used to create a bandpass filter. Impious, could you elaborate on how to do that? Because I'm looking for a bandpass filter, can't seem to find one. Short of spending serious coin on a fosgate 3sixty.2 just to cross over two speakers.....

Thank you Sandt3. I've narrowed choices to the ZR or the Anarchy. I don't have any shops near by to hear them so I have to read as much as I can. Will the Anarchy go up into the lower mid range area and deepen it up a bit?

Impious - How would you rate the Anarchy against the JL ZR800? I know this is opinion, but i take a lot of stock in your opinion.

I'm looking getting at a pair of those Anarchys for my doors. What is their mounting depth?

Reversing just the mid, or is reversing it at the amp ok? It'll do the tweeter too