Nocturnus
-
Content Count
39 -
Joined
-
Last visited
Posts posted by Nocturnus
-
-
Please ignore the big ass rats nest of wires, this will all change.
I was seeing how this old amp rack I made fit on top the box. I will end up with a new rack that mounts on top of the box with 3/4" space between for wires/etc. I will have a trim piece that covers and will all remove to show the amps.
Second battery will be in the spare tire well along with all power/ground/relay/anything power related.
EQ/DSP will go on a flase floor on the driver side of the hatch.
Got lots to do, but so far it sounds pretty good and however this happened, I like it better then the DC18 on the SQ 2200w amp.
0 -
Little more progress today. Ports all built just sitting in the box, Too damn hot in the garage to finish today.
0 -
Ok, finally started over today. Box is cut, just needs to get 45's put in, port cut out/rounded, speaker opening cut, and glued/nailed. We built ther box on ther bigger side (2.52ft3 @ 29hz). We will loose some space due to th 45's and some bracing,. Should be in the car Friday for testing. Need to see if the SQ 750w amp does it or of I need to get the SQ1200w.
Gear list as it sits.
OEM HU
SoundQubed Q4-120
SoundQubed Q1-750
AudioControl EQL
Sundown SA-12
Rockford Fosgate PUNCH PPS4-6 6.5"
Morel MDT 12 1-1/8" Neodymium Tweeter (love those tweetersd, been using that model since around 2002)
0 -
Man, I've been putting this off for a while. Going to try to get started on this either this or next weekend. I need to finish before it gets too damn hot here in CenTex..
Much easier to do work now with my new schedule. 3 days off one week, 4 the next.
0 -
It does. I did the whole huge box thing with a DC AL4 18 and had no hatch left, but that was all too much for me. I was also based my box build off of what Sundown had spec'ed out for the SA-12 baised off their Sketchup model.
0 -
I guess I'm missing something. 85in2 seems way to high. Plugging that info into Torres, I would need a 14.4x5.5 or so port. Then I/'d need to make the box bigger to get the box size that Sundown recommends. The measurements in one of my first posts is pretty much the max I am giving for a box. I still have to have a somewhat usable hatch.
0 -
I'm still playing with the software. no clue what im doing after I open a project.
0 -
dual 2 ohm
0 -
Mine errors out when i try to enter a box volume. Thd only input it will take as a good value is if I leve it blank,
Yes, and I get illegal operation errors after my data is entered correctly. Never got it to run good on my pc's.
I use the ProAlpha version currently. It still pops up error on startup and closing, and requires task manager to close, but works fine.
0 -
Yes, and I get illegal operation errors after my data is entered correctly. Never got it to run good on my pc's.
0 -
Well, even though I say I will upgrade amps, I edo have other things that come first, so that upgrade just depends. This would also be the 3rd sub amp buy in 8 months. Buying and selling is getting a little old now.
0 -
What should I be shooting for there?
0 -
Ok, got it right this time.
or slightly larger
I will be adding some bracing inside, aloing with 45's in the port. Not sure on the baffle, if I add a 2nd, it will be on the outside of the box. Box will be birch, since I alredy have the sheet. Should I am for close to 2ft3 or is anywhere between their 1.5ft3-2ft3 good? Might be wanting to say I will upgrade that SQ Q1.750 to a Q1.1200 next month.
0 -
I always mess up something when I do this. I got my hatch false floor done today. I'll post a correct box calc in around 5 days when I have a chance to get some good measurements.
0 -
I keep hearing mixed feelings on sub back/port up. I also had some number typos in the calc I had posted at first.
\
0 -
Got my SA-12 back in October and finally getting around to a box build. Fired up Torres.
Single SA-12 on a SQ 750w. Look good to go? Or any thing I need to change?
=Going in Volvo V50 wagon, sub/port firing towards hatch.
0 -
I built my port before i did any round over, so for the internal L i was going to belt sand, but the inside and outside ports I can use the router.
So maybe I'll be done with the box tomorrow.
0 -
How much round over do I need to do on the 90's inside a port?
0 -
Slow going. Ports still need to be rounded over (port is not attached to box at this time.
Might do some more work today after i get off work. Either try to finish the box or get the amp rack in place and locked down and mount amps and such on it.
0 -
I'm really not a fan of how tall the box is. But it's the only way to be able to get the sub to clear the amp rack. My original idea was to fire sub up and port back, which would make for a wider shorter box. I should prob sell that D3100 local and get a smaller XS power battery if need be.
0 -
OEM stereo -> Audiocontrol EQL -> Soundqubed Q1.750 -> Rockford PPS4-6 and Morel MDT-12 & Soundqubed Q1-750 -> Sundown SA-12D2
Quick snap. Box is big and awkward. Its turns up around 2ft3 after sub and port displacment. The box nex to it is for a 2nd battery (XS D3100, I know that is too big for the little amp, but got that battery when I had a SQ Q1-2200). Sad thing is I need a 2nd battery even for that 750w amp. Maybe I should buy a smaller battery. But it;s easy to build a new box,. So i'll see how this all works out in the next couple weeks.
0 -
In my old 96 Formula I ran Morel 8" and Morel MDT 12 tweeters I didn't have to butcher anything, My stock tweeter location was on the door above where the stock 6.5" was. Just had to make a bigger trim ring for the 8".
I still run MDT 12's to this day,. I love em.
0 -
Can't edit posts.. ugh.. i had to dig around for old pics..
Just like that.
0 -
I just had an idea.
Please excuse the ghettoness of what you are about to see. I was tired and just wanted my front stage running.
So, i think I'm going to cut out mdf piece to fit towards the bottom of the spare tire well, then have a piece cut for that lip at the top (but only the lip area). Then do some quick fiberglass work to get the amp rack sides. I can move that SoundQuibed 4 channel over some, fit my PPI DSP towards the rear (where the power side of the amp is), get the SoundQubed Q1-750 mounted more towards where the LC2i is (thats going away) and get my fuse distros in. The back ofthe 4 channel and the DSP will be under the box, but that should be a non issue. I'd prob need to raise the top lip of the amp rack off the top of the floor just to be able to run my cables and all in.
Or i might do like one install inthe past and just carpet the hatch floor and tire well, cut MDF for the bottom of the amp rack and make a trim pieces that make a false floor.
Just need to see how far the box is going to come out from the back seat and go from there.
I also hate when I start brain storming when I need to be winding down and getting ready to sleep.
0
2005 Volvo v50: Install version, eh, whatever.
in Build Logs
Posted
LOL, me too! It's going to be a while. Next I need to pull everything out of the hatch clean and sound deaden, then I can start on placement. I got 4 days off thuis week so i got some time to work on things.