Jump to content

Swimmerdude

Members
  • Content Count

    90
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Swimmerdude

  • Rank
    Newbie
  • Birthday 09/20/1989

Contact Methods

  • AIM
    flyinonwater
  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Location
    Harrison Twp, MI
  1. Swimmerdude

    MAW-15 for SPL?

    yea, have everything as far to the drivers side as possible. Some other things to test would be with the box almost against the back gate, the box a foot further from that, and like 3 feet from the gate. Your scorew ill differ.... just got to find what does best in your car. Hey, even having one of your sun visors down can gain you .5!! LOL.
  2. Swimmerdude

    MAW-15 for SPL?

    It can be possible to get a 140 with a box tuned to 45hz. Some things that will help you are tuning around 5hz below the resonance frequency of your vehicle. Hopefully you can find that out. If not, 45hz is a good starting point. Next, trying to minimize impedence rise. With impedence rise, i bet the sub will be lucky to see even 400 watts, probably even less. Get some 8g wire and use that for speaker wire. Also, make sure you 45 the corners of your box. Add some bracing to it to, but from what i have seem, dowell works great to minimize air resistance inside the box. Then when you are metering, box placement will be key. You can gain yourself maybe up to 1db by just where you box is placed in the car. If you can manage to get some testing in, this is a key thing to test.
  3. Swimmerdude

    1 more SSD or switch to q?

    I would definitely try out a ported box before throwing money at another sub. A new box costs what, 25 to 30 bucks and a few hours of time... compared to a few hundred. Now, you say you like sealed box's for low end extension. How low are you talking about?? Maybe below like the 25-30hz mark the sealed might be better, but other than that, the ported will be all around better for what it sounds like you need.
  4. Swimmerdude

    BL 10"

    I have seen quite a few drivers play in oversized boxes, even some fi x's. Really, you are going to gain a good amount of efficiency. This means you wont need as much power for it to reach its limits. In an oversized box, too, you will be getting some insane low end. The box will generally play a little flatter but you wont have exactly tight bass compared to one in a smaller box.
  5. Swimmerdude

    Wall v1.1

    do a center port for music. From what i have seen, center port will sound better for music.
  6. Swimmerdude

    Song at 39 htz

    hypnotize is in that range. the first bass line is high 30's i believe, second bass line is 34hz..... which is where i peaked then it goes into the 40's or whatever that higher note is.
  7. Swimmerdude

    What do you guys use for boxes?

    I'm on the poor side of using equipment. I have home depot cut the large pieces, then i use a circular saw for the smaller stuff. I use a level as a straight edge to get straight cuts. Then i use a saber saw for holes, i dont have a router yet. I use tite bond or pro bond for glue.... better than liquid nails because they are made for wood and liquid nails is made for many things. Use wood screws, deckmate's are the way to go;) And you dont need to go crazy with screws, they are only there to hold the box together until the glue sets, which is what mainly holds the box together. For braces, i use dowell or for high powered installs, i got with threaded rod usually.
  8. Swimmerdude

    Speaker bs...

    All i have to say is enclosure design is everything. Don't get too cought up in drivers that are close to the same and the t/s specs of the drivers.
  9. Swimmerdude

    RL-p SPL Numbers

    Hey, What are some numbers you guys have been hitting with you Rl-p's.... whether it may be for straight SPL use or just a daily driver and got it metered. I didn't really find any numbers of the Rl-p's and searching didnt help really. If you could, name Car it was in, power, box, and size of Rl-p's.
  10. Swimmerdude

    Pause?

    I was told the Eclipse has Pause on the remote, so I am ok with that. As long as i have the CD read before I get up into the lane, running slow wont bother me.
  11. Swimmerdude

    Pause?

    I might want to get an Eclipse CD8445 and get rid of my Alpine CDA-9851. The Eclipse has a ton more tuning features and the 8v pre-outs. But, you guys seem to not like the Eclipse... should I get one, or no?
  12. Swimmerdude

    Welcome

    woooooot!! Fi is here!!! Welcome.
  13. Swimmerdude

    Pause?

    The only reason I still am keeping my Alpine is because it has a pause button!! And Pause buttons aren't even on the controller's on other head unit's too.
  14. Swimmerdude

    mythbusters do a 161 at 16hz!!

    I watched all of it, thought it was pretty sweet. Maybe better design for the sub?? And don't use a sun roof car next time!!! That 161.2 at 16hz was sweet... you could see the car shaking like crazy!!
  15. Swimmerdude

    first victom

    Meany!!! No need to abuse them lil guys, they never did anything to you now, did they!!
×