rich00

Just give them a bit of time if you emailed them today or yesterday they wont get back til monday. Wait til middle of next week and then either call or hopefully they will respond here. They are very good guys and will get you an answer just patience.

gotta wait for my check to clear on monday and money will be sent hopefully

are they any of these left? I would love to pick one up to replace my jl amp.

My single 10" ported pounded just fine for me in an explorer. Cant wait to install it in my civic.

I have a Fi X 10" in the recommended ported box 1.14ft^3 tuned to 32 and it got plently loud in my explorer off 160 watts. Im gonna put in my civic in a sealed box off the same power and am looking for good results. They will work good in either sealed or ported. I love the way this subs sounds so i wont be getting rid of it nor am i sad i didnt buy another brand.

Thanks that's all I wanted to know.

I'm getting away from a ported box with my X 10" and going small sealed like .6ft^3. So what kind of power would get it rocking pretty good. I'm thinking around 300 but currently have 160 on it and love it. I want more sq and not so loud as ported. I love the sub and don't want a different one just different sound.

Or dont answer my question. Im not a nub like most ppl on this forum. Ive had plently of systems in my time from sealed to ported. It will sound completely different with 160 watts sealed vs ported. It comes down to my question again more power for the sealed box or stay the same?

Well ill chime in and say the X are wonderful. I have an X 10" with 180 watts in a ported box and wow is all i can say. It is so musical yet plays plenty loud for me. Im still trying to figure out how to put it in my honda civic.

Just make sure you get it sealed up really good if you do that.

Well i have no experience with new RE stuff. I would assume its decent but who knows I personally bought a Fi X 10" and have 180 watts and it slams harder than my 2 RE re 8's off 400 watts. I love this Fi sub i would go look at there lines and see what kinda options they have for that money. I think SQ is great and spl is all i need at this point and its only a 10". My box is 1.14ft^3 tuned to 32hz just as reccomended.

Okl first of all a bandpass box is terrible for daily. You should get yourself a custom made ported or sealed box. Next your subs are rated at 300watts rms each so you want between 500-600 watts rms for the pair. Buy a solid amp and get a real box and you will see what these subs are all about. You should also find out if you have dual voice coil subs or single voice coil subs so we know what ohm load you can run. Do some research on your speakers or just ship them to me.

Well .8 isnt optimal but shouldnt cause too much issue. With a larger sealed enclosure the rms wattage of a sub typically goes down. I would put it in there and see how it sounds. Just watch your gains and you should be fine. Probably wont be as tight of bass as a smaller sealed enclosure but thats why i would try it out.

Just run them active its not that hard. You have two amps so why not?

So i have looked at the ported box design at the top of the page for an X 10". My question is how will this sub perform sealed in about .75ft^3? I know ill get more output out of the ported box and a little tighter bass from sealed. Is that 32hz tuning ideal for the X 10" I would assume since the fine folks at Fi posted that diagram and they know their speaker better than anyone. Once again im powering it off the back two channels of a JL J2 320.4 so around ~180 watts. Vehicle is a 1998 explorer so space isnt the issue at work here.

I need a pair of inexpensive 5.25 for my doors of my explorer. I am gonna have about 60watts per channel. I dont wanna spend over $70 tbh im pretty broke right. The bostons I bought used were blown so I need some door speakers now. What would you recommend? I dont like harsh tweet want more natural sounding. I have had good luck with boston, old school orion, cdt, and image dynamics.

its a single voice coil you cant wire it any different than 1 ohm. If it dual voice coil that is different so what kind of coil config do you have>?

So my 4 channel doesnt have a SSF built in so am I gonna need with a Fi X tuned to 32hz factory reccomended box. Ive never not had one and found http://cgi.ebay.com/SUB-SONIC-FILTER-Harrison-Labs-PFMOD-SUB-tm-NEW-/190367536675?pt=LH_DefaultDomain_0&hash=item2c52ca1623 which i could buy and turn to 20 or 25.

Well ill try it without one once i get my sub and box and see how things go.

So those pg comes seem a good price I've been searching used to no avail. I only need one set as well. I know its a tight budget but spent too much on sub and HU and box. So I'm already over what wanted to spend.

Anyone ever used? http://cgi.ebay.com/Pair-Orion-XTR-522-5-25-Coaxial-Speakers-NIB-/350307314102?pt=Car_Speakers&hash=item518ff169b6 They seem a bargain til I get more monies. Then move them to rear fill.

box is tuned at 32hz so why block 30hz thats not much lower than port freq? Is that a big deal?

Or sell the old ones and buy 4 new ones or perhaps 2 SSD or Q?