mase

Figured out the problem. I just got back from a deployment and somehow the ground wire got loose. So everything is working now. Next step is to upgrade electrical, lights dim pretty bad.

http://www.amazon.com/dp/B004X63LPI/ref=pe_175190_21431760_C1_cs_sce_3p_dp_1 that's what i had just lying around. i plan on building but haven't had anytime

that is how i have it Amp settings? And use a dmm to confirm ohms at the amp. that is how i have it Amp settings? And use a dmm to confirm ohms at the amp. I have everything turned up right now all the way, if not then don't really get anything out of it

that is how i have it

I have to turn everything up all the way to get it to even start moving it much.

D2

http://img809.imageshack.us/img809/6084/ampwiring.jpg

I have the Audiopipe pushing a ICON 12. Is that enough amp to push the sub. I have it hooked up right now and well it doesn't get much louder than my stock speakers.

let me know how it works out for you. someday i might upgrade

I have the same car and was going to do it but I just kept the factory radio and everything works fine.

thanks aaron and chevyboy for the help. can't wait to get back to the states to hook it all up.

Thanks man, I will have to check out the images when off work. Won't load on this thing.

I'll try contacting them to see if they can get it switched around to 2 Ohm. i jsut ordered it a few hours ago so we will see.

So I should have got the 2ohm?

So just bought the ICON-12 D1 along with Audiopipe AP15001D Mono. Was wanting to get a little help on how to wire it all up and everything. Thanks for any help.