Mr_Jones
-
Content Count
27 -
Joined
-
Last visited
Posts posted by Mr_Jones
-
-
Sounds like the dust cap is coming unglued from the cone look for a small area around the dust cap where it joins. A little high strength flexible glue will fix it if it is.
0 -
I own an older set of HSK high power Hertz components and like them, they sound good and work well. Are they worth the money? I don't know I would suggest auditioning them if you can, thats how I ended up with them. I put them against alpine F1 Components and they sounded better IMO so thats what I went with. They are not harsh like others and sometimes don't sound as loud as they are really playing. In the end it is what sounds best to you, everyone has a different set of ears and you may like the Jensen speakers sold in walmart and thats fine
thats why there is such a wide range of speaker styles spec and prices out there for the range of people out there. So best of luck 
0 -
I don't think anything makes it a bad woofer, as far as I can see there is nothing wrong it them. They look to be built quite heavy and with quality parts and the reviews are all great. I just think most view them as a cheap bargain basement brand? I would not be afraid to try them but I think I will try the avenues I listed above first
my RL-p woofers are quite well built as well 
0 -
I also say If you don't have the mula, then go with the the DAYTONS, but if you do have the money, You should look at the Fi Audio BL's you can have them Tailored to handle an IB3 setup, and you can also have a High roll surround instead of the old regular fatty.
Cool thanks for the info, I think for now I am going to try a single Rp-L 15 and then maybe try both and see how it sounds and if it doesn't sound right I will seriously look at solutions from FI. I have the soundsplinters sitting here so it would be wasteful not to give them a chance I guess. As always open to more opinions and information!
0 -
Thanks for the info and the link lithium! Also I guess I never really gave a whole pile of thought but I do have a 15" RL-p from soundsplinter that is listed on a comparison chart from the website lithium linked. I think I can get another one as well I am pretty sure they are both 4 Ohm DVC models and I am not 100% sure if the other is damaged it was in a head on vehicle crash but still looks okay.....Anyway the specs can be viewed here http://www.soundsplinter.com/rlp15_subwoofer_information.html I would like to use these subwoofers as it would be the cheapest route and I know they are quality woofers. Any thoughts on that? I didn't think they would make a good woofer for this application but I may be wrong I guess.
0 -
Very nice how does it do for output? Is it comparable to something in an enclosure?
0 -
My guess is it was clipped to death
0 -
Well thanks S.DeYoung for pointing towards the build I was looking for. Also looked up the build linked there to the 93 caddy which is an awesome build that is still not done and there is no updates on the challenger build either! It looks like the IB builds are all still in progress aside from the cutlass. Anyway after much reading and such I am still seriously considering the Dayton drivers but have also looked at the FI IB3 drivers and they are very nice looking. I emailed the sales department from Fi tonight to ask shipping charges and what their thoughts were on using two of their 15" IB3 woofers in a build like this. Time will tell what I do although I hope I don't have to wait a full month before I get the woofers if I do go the way of Fi. I must say Fi's subwoofers look very good and have great reviews for the price point. Any more input on the situation is still much appreciated. Maybe this build will have pictures and be posted.........don't know when it will be though as I have a busy summer and autumn ahead of me.
0 -
Hey am interested in doing a baffle setup like this and am wondering if you ever got it finished and how it worked out for you. I am trying to decide whether to use the Daytons or the Fi IB3s I want to do 2 15" subs in IB to save space as you did and to get some good low end
0 -
Yes the plan is to seal off the trunk. Why would you not recommend the dayton speakers? All reviews are good they are supposed to get loud and this isn't a true IB setup unless I leave the trunk open......which is why I was thinking trying to match the bad to the trunk at least a little would yield better results than a true IB woofer. I could go with two FI IB3 15"s instead but would like some theory as to why they would work better other than the greater xmax which is nice. I am not out to win competitions just a daily driver for my commute to work but I do like it loud. Again just trying to cover my bases and get all the info I can. And thanks for your input, looking forward to more
0 -
I guess to start I would like to find the thread in which it was previously done. Also just trying to make sure I have all the facts straight. Since it is using a trunk it isn't really an ib setup and the cubic space in my trunk is 12.5 cubic feet and the vas of the two woofers is about 20 cubic feet so the trunk would act as a sealed enclosure for these. Or at least something in between ib and a sealed enclosure. I am just looking for some wisdom to help me feel confident about going forward with this. I guess worse case it doesn't work right and I use them in cabinets for HT and build a smallish sealed enclosure for the Rlp and lose trunk space.
0 -
So here it goes I seen a thread where someone used two of these for this but I have lost it and cannot find it. I am interested in doing one of these setups in a sunfire. I have a15" soundsplinter Rlp but don't want to take up the trunk with a large enclosure. The IB setup would leave trunk space and be pretty cheap as far as the woofers go. I have a sundown 1500 SAZ to power them and know I would have to be vergil with gain settings......anyway any input is much appreciated. I have read the thread from Onebadmonte twice now and I think this should work good just looking for extra info before I order the woofers.
0 -
I think there is a lot of stuff coming up in or future that may cause large changes our lives as we know it.
0 -
Maybe just have to construct a test box with a panel with the 30 small ports in it that can be removed and replaced with a different one in the future? Like just screw it into place for temp testing then if it sounds like crap remove it and put in a properly ported side and glue it up. I don't know just a thought i had may also be a bad idea.....
0 -
MMMMMM Woofer porn FTW those are beautiful looking drivers.....
0 -
Hello all, am quite new to this forum and have been around caraudio for a little while but still have a lot to learn especially as I haven't been as passionate as most seem to be here
Anyway I have this old car in good shape that I am using to drive to work at the coal mine and have put a stereo into it although most needs to be reinstalled as it is just temporary. I have a 15" RL-p Soundsplinter sub on an SAZ 1500D amp and an alpine HU and some Hertz 165 high power components running on a 400W MA Audio amp I had laying around. The Sub is in a ported enclosure I built a while back for the 08 Charger I had but never put the sub into...... problem is the enclosure is too tall to fit into the trunk of the pontiac so it is sitting in the rear seat right now. I am looking at a new enclosure build here and not sure if I should stick with the same box I have now only a slightly different dimensions so that it fits in this trunk or if I should try some sort of 4th order setup to vent the bass into the cabin. I hate the thought of the bass being trapped in the trunk and want it in my listening area where it should be. Right now its nice having it in the back seat but kind of hard to hide and severely cuts down passenger room Open to suggestions and ideas, have been scrolling through builds and stuff and seeing some nice things one here keep it up guys! Might take a video of the flex happening tomorrow, it is quite loud to me the way it sits right now.0 -
Will be watching this closely! Should be interesting
0 -
I think you are very good at what you do, would love to have someone like you near me to be able to learn from.......trial and error gets old
0 -
I just get items shipped to a hardware store and then go pick them up but you would have to make arrangements with someone I guess or ask them about shipping to canada? I don't know as I said just a suggestion, its easy for me heh0 -
I see that Skar audio has a really good deal on their new 10" subs that are 600 rms a piece that would work good with your amp (same amp I have). If I were you I would be looking hard at them I mean for $120 a piece shipped in the states......you can't jsut ship them close to the border and then go across the border to pick them up? I do it all the time but I am approx 30 mins from the border...... anyway best of luck!
0 -
Would it be best to go with a traditional ported box (built to manufacturer's spec also what win isd comes up with) facing the rear of the trunk or do a horn or something else facing a different way? I like the build on here in the old caddy with the 4th order bandpass although I think i would like to be able to monitor my sub since it seems to have a tendancy to crack the surround.
0 -
Sorry about that I really should have known better heh, I am using a Soundsplinter RL-p 15" subwoofer specs are here: http://www.soundsplinter.com/rlp15_subwoofer_information.html
It will be powered by a Sundown Audio SAZ 1500D amp. I can go no more than 15" in height for the enclosure I may be able to fit the sub standing up but most likely it will have to fire up or down.
0 -
Hello all, I have discovered I am going to have to build a new enclosure for my subwoofer to fit in the current vehicle I drive to work. The car is an early 80's sedan with a large but shallow(height) trunk and I do not really care if I have much space left over. I am pretty good at building things and have no problems making a pretty elaborate box, so my question is: In the trunk of a car like this what is the best enclosure to build without walling off the backseat? Any suggestions would be greatly appreciated!
Thanks in advance, Mr_Jones
0 -
Can't just get a surround, would have to buy a whole recone kit. Silicone should do the trick. Looks a little ghetto, but works.
actually you can, its risky
but go on ebay and search
ROBOTUNDERGROUND
he sells all the TC, SSpliner, And OEM parts
i has the same problem on my RLS subs, they need an armoral, or some type of leather cleaner. or they really do crack
Thanks for the info, I did put a good thick coat of mothers protectant on it today to try and help revive it......
0
Hertz HSK ,ID CTX or SOUNDSTREAM RF-60C
in Subwoofers / Speakers
Posted
I also have a set of Hertz 165 HSK components and I like them very much they handle quite a bit of power and get loud but just don't sound harsh they have a nice smooth sound to them IMO again agree with others that different people like different sounds. I demoed my set against the alpine F1 set I was looking at and I preferred the Hertz set. Are they worth the money? well thats up to you and I would definately suggest finding a place to hear some.....