-
Content Count
772 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Angelboy863
-
oooh. i'm excited about these zcons
-
Danggg. How can i get a hold of the ones in circulations?
-
Now when you were doing the vid, were the seats down? Seats down cooool. you should try a hair trick. If you can, then i'm definitely buying a pair of xcons!
-
Now when you were doing the vid, were the seats down?
-
How many ft of wire? what wires? and where do the wires go? Thanks!
-
makes sense, so when what fuse do you reccomend? on the wire amperage limit? or the alts? ahhh yes it does, i got lil project to do today then thanks well... typically user is suppose to fuse according to wire's rated ampacity... However, using a smaller fuse will just make things safer. EXample- lets say user uses 4awg wire. That may be able to handle 150A BUT since the factory wiring is still connected, fuse size doesn't need to be that big if you do not want it too.... If running 100A stock alt, typically fuse size can be around 100-120A factory. User could run 2nd run and fuse anywhere between 60-150A if running 4awg. Smaller the fuse, quicker the pop as long as it doesn't pop all the time because it's too small, know what i mean? Thanks! that all makes sense. I have a stock alt. and if i grabbed a 250-300 fuse, that probably wouldnt be right.. better getting the 100A fuse
-
Well I got the answers I needed without providing all that information. Some people just know things through experience versus research. But thanks anyway for your participation.
-
Wasting peoples time? I'm here to gain all the information i can from people with experiences. You're the dumbass that clicked on this thread.
-
Alright thats all understandable. Thanks everyone for the info, and um, some of you need a chill pill
-
What could go wrong if i just replaced the old wires ? lol
-
When you say never replace, but add, are you saying I don't get rid of the previous stock wire? and just add these new ones to those?
-
What's the difference in RCA Cables?
Angelboy863 posted a topic in Amplifiers / Head Units / Processors / Electrical
I would like to know about all the different RCA cables like 2 channel, 4 channel, and 6 channel What goes best with a Sundown Audio Monoblock Amp and one sub? I plan on buying a 2 gauge Tsunami Wiring kit and it only has the power, ground, and remote so I have to buy a RCA seperate and I want to make sure I don't buy the wrong one. Thanks! -
What's the difference in RCA Cables?
Angelboy863 replied to Angelboy863's topic in Amplifiers / Head Units / Processors / Electrical
you dont really ''need'' an amp kit just power ground cables remote turn on rca speaker wire and ring terminals i found that most cost companys charge more for the kits than you just buying things yourself separately edit* spelling I agree man. Thanks! -
What's the difference in RCA Cables?
Angelboy863 replied to Angelboy863's topic in Amplifiers / Head Units / Processors / Electrical
Alright, does anyone have any tips or recommendations for a amplifier kit for me? -
What's the difference in RCA Cables?
Angelboy863 replied to Angelboy863's topic in Amplifiers / Head Units / Processors / Electrical
The SAZ-1500D -
Oh alright. Thanks. I'm not into much of a rush but I just had to know for sure.
-
This is my video of a single XCON 15. I did not try a hair trick but it looks possible..... Nice man! Where is your sub facing? the front? and how many watts rms you pushing?
-
I'm guessing the subs must face the front and have ports facing the front? Mostly every video i've seen of hairtricks had the subs facing the front of the car. And I believe it's about cone area and 2 15's should do the trick, or not?
-
Appreciate the help. I guess we will have to find out. So whats the recommended box specs for these?
-
It's going to vary from vehicle to vehicle, and installation. Just an example, I believe Dvalue has two 10" or 12" icons (not a spl orientated driver) in a trunk car (sealed off, front firing) and he's doing hair tricks... What do you think is possible for a 1995 Acura Integra? Take back seats out? Leave it in trunk? Ported or Sealed?
-
Crap. No I don't plan on walling it. I just wanted to see what I can do on a budget. A Acura Integra has a fairly small surface area, so I was thinking that 2 15" Z v2's would work. @bigjon you did hairtricks? what were you using for your system at the time?
-
I joined the forum because my friend introduced to me the ssa store. I quickly fell in love!