-
Content Count
183 -
Joined
-
Last visited
Posts posted by sps1989
-
-
sound deadener
box
0 -
-
just gotta add the top and front and the box will be ready to install the subs into.
0 -
Thanks man. And yeah it does sound way better despite how it sound in the vid. The rear they mirror already fell off twice lol.
0 -
Thanks. I may just do that.
0 -
Ah. I didn't think about fiberglass. Would I just put a patch or fabric across the hole and staple or glue or screw it to the box then fiberglass over it?
0 -
One step closer. Hopefully I will finish before the end of the week.
Also if my subs are too deep, what is the way to make them fit? I can not add spacers to the front of the box. Should I just sand the back behind the magnet til it fits? Or just cut a hole in the back and cover it with possibly thin metal (1/8" steel)?
0 -
Lol it does look like it is. But i cut the carpet and grinded it to bare metal.
0 -
-
I am finally starting my build for my crew cab hd. It may take me a while to finish due to my full time job. So i can only do it in the little time i have after work before dark. The build will consist of (including items already installed):
1x Power Acoustik PTID-8310NRBT
1x Crescendo BC2000
1x Merlon MEAM50.4
1x DB Drive S5 6C 6.5" Components
4x Sundown SA-8 V2
1x Stinger SPP1500D
1x Mechman 270a Alt
Stinger 1/0 for Big 3
Sound Quest 4 Gauge for Merlon
Performance Teknique 1/0 for Crescendo
Now some pics:
The truck
Under the hood
Starting the box build
Stay tuned for more!
0 -
These are strays so if anyone near me wants them, then come and get them. And no I will not ship lol.
0 -
Found these kittens by my grandmas house. There are 4 in the the block total...
0 -
good job man. they sound great. keep it up
0 -
Yup. Didn't want the same old under the seat box.
And I'm sorry but I forgot that torres didn't give the right specs cuz i was using 5/8", but the specs are:
1.9 cubes gross
1.48 after all displacements
Port: 1.625"x4.75 each
Tuned to 35 hz
If you want the box dimensions I will post them too, if requested.
0 -
I like the symmetrical look and I believe it made it a little easier than one big port on the bottom. And its on the bottom cuz he wanted it there. And i figured that it might help using the extra part of the box than by the sub..
0 -
Ill post a screen shot of Torres when I get home. I'm on mobile right now
0 -
A friend of mine asked me to build him a box for his 2001 Dodge Ram 1500 ext. cab truck for 1 Alpine Type R 12. And this is what i came up with...
I will post pics of the installion later...
D4 Type R 12:
The ports:
Assembled:
And carpeted:
ps sorry for the not so many pics. didn't think about posting it till i was almost done. if you have any questions, comments or anything feel free to post
0 -
Sorry. Moved to build log
0 -
Pmd ya some questions
0 -
thanks guys. i will see if i can get it to try it out. how do you think it compares to a merlon meam50.4?
0 -
I have someone wanting to sell me an interfire a700.4 4 channel amp for $75. Has anyone used this amp, or something close to it thats made by interfire? Do they do rated? Are they clean? All I have found is this... http://www.interfireaudio.com/download/interfire_catalog_2009.pdf
0 -
i changed some things and now only the passenger side speaker is making the sound. the tweeter is fine just the speaker. could it be the crossover? i havent tried switching the drivers with the passenger one yet.
0 -
-
Thanks ill check it out. And its weird cuz only the front speakers are doing it. The backs are fine. I found some more Sonys that I had in another vehicle to use. And its not really a buzzing. Its only audible when there is plain talking. Hopefully that link will help
0
2002 Chevrolet Silverado 1500HD Build
in Build Logs
Posted
Its ok so far. I have a bad rattling problem right now that is ruining the sound. Once I fix it, I will post some vids.