Jump to content

bld 25

Members
 View Profile  See their activity

  • Content Count

    81

  • Joined

  • Last visited

Posts posted by bld 25

  3. Posted

    hey, i have a destjl built E15k (with the boob cone and blue e), and i spoke to nick via email a few months ago about a recone. I am just wondering if these would basically be arsenal parts, and how the sub would compare to the original. The e15k and the 15 arsenal have similar specs, xmax, and box requirements, so i figure this would be a good match. Just curious, and i may find out what that would cost if this is a good match.

    thanks

    brian

    0

  9. Posted

    in the zaph test, it is pretty smooth up to about 4.5k, and then a steep drop, which some say allows for playing full range with no problems.

    That's about 10KHz short of where I'd start to consider something marginally "full range" :P

    Yeah, i mean that the rolloff was as such that a crossover may not be needed. :P

    0

  12. Posted

    I have been learning to use winisd beta, and it is really strange how the rlp models. it suggests like a .4 cube box with a port freq of 38hz. When i punch in 2 cubes at 28, it has an odd peak very low, and is like 2-3db down as the freq increases.

    Conversely, i also have an ED 13ov.2, and it models quite linearly in similar boxes. ( i have run them both in the same box, and they do sound quite similar)

    any ideas?

    0

  13. Posted

    in the zaph test, it is pretty smooth up to about 4.5k, and then a steep drop, which some say allows for playing full range with no problems. there is a slight dip at 2k, but that can be eq'd. The ability to play up that high creates many options for tweeters, as most good ones can go to at least 4k with no problems. Good luck!

    0

  16. Posted

    $58 plus shipping for the kit. Let me know the zip and Ill get that quoted out as well.

    Thanks,

    Scott

    thanks scott. I will let you know if i find another motor. Any idea what approx t/s would be or box requirements? I assume it would be a mix between an assassin/x series with a tc2+.

    It should at least have good sq and work in relatively small boxes, right?

    0

  24. Posted

    Is it a 2" coil? I think it is. I might have D2 coils or maybe only single 4 Ohm. Solid SQ as there will be a fair amount of Xmax to it. Itll be decently efficient as well given the parts I would use, but it wont be able to handle tons of power...

    Need to confirm first the coil size... do you have a pic of the motor?

    sorry, i don't have a motor yet, i saw some on ebay and wanted to see if it was a possibility first. If it is a 2" coil i assume the power handling wouldn't be much better than 500-600wrms, but as far as box sizes and xmax, what would i be looking at?

    thanks so much for your time!

    up

    0

  25. Posted

    Is it a 2" coil? I think it is. I might have D2 coils or maybe only single 4 Ohm. Solid SQ as there will be a fair amount of Xmax to it. Itll be decently efficient as well given the parts I would use, but it wont be able to handle tons of power...

    Need to confirm first the coil size... do you have a pic of the motor?

    sorry, i don't have a motor yet, i saw some on ebay and wanted to see if it was a possibility first. If it is a 2" coil i assume the power handling wouldn't be much better than 500-600wrms, but as far as box sizes and xmax, what would i be looking at?

    thanks so much for your time!

    0
×