Briggiboy33
Members-
Content Count
239 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by Briggiboy33
-
im making a box for 2 kenwood 12s. so far im kinda lost on how to make it but this is my design. 25x25x40 that will give me 3.5 cuft thats inner dimensions. i was thinking i put the port inside? the port would be 25x3 and it needs to be about 45 inches to make it 33hz. what dou you guys think? am i off to a good start? bad start? and input would be greatly accepted.
-
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
. Thank you for that. Iv really just been going off of whatever someone says is "good enough" for my port. But is the cadstd Free to use? -
Alright so if I wanted to buy car speakers and subwoofers what would I need to make them work and sound good in my room? Im planning on getting some 6.5s components. And maybe 2 8" subwoofers. What would I need to make them work at home?
-
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
I was gunna have them on the out side... -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
Alpine type E 12" box can be 25" wide and everything is not a problem. Any help I'd be very greatful. Iv tried google sketchup with no luck... it was too much work. So I made a 1.5 cuft box and was gunna putports on it. -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
So two 2.75inch square ports prob would be too small to right? =/ I may end up just trying it and see what happens. -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
Why does it get longer with each port you add? -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
So on the port calculators it says like for 2 three inch ports the length needs to be like 24" or something.. Is that for both ports or is that as a whole? -
This isn't gunna happen any more... Plans changed.
-
Alright well my buddy has a misubishi eclipse with 2 12" alpine type E's in it right now. He ordered two more today. So I dont have any dimensions but I want to make a ported box tuned to 31 hz. And probably 6 cuft. But should I make one big box? Or should I seal off the subs?
-
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
Do you think two 3" ports would work? -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
Your correct. I changed the dimensions to about 21.5x10x something....dnt remember but it gave me just about 1.5 cuft. Sorry for the confusion -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
Would 2 2" PVC ports be enough for one 12? It would be 10 inches long each but would be inside the box. I already made this... Just havnt glued all the pieces yet. It's 1.5 cuft not accounting for the 2 10" ports inside... Would this work or is it not enough port area?... I was a bit worried about it -
alright this is the box im planning to make.
Briggiboy33 replied to Briggiboy33's topic in SPL & SQ / Fabrication
I already stated those are my inner dimensions... -
Defiantly mostly because I'm 17 and can barely afford any of this so I'm encouraging you to get it=D haha but nice build man! And I love fi also!
-
Alright so I'm making a box for 2 kenwood 12s. I'm thinking 1.5 for each sub. Idk wether to do a single chamber for both or separate chambers?.. I'm leaning more towards one chamber and one port. I want it tuned to 32 hz. This box is going into a trunk so size isn't a big issue. If anyone could make me a nice design I'd be very greatfull. Thank you.
-
Ok let us know, its just really hard to play the guessing game with enclosure measurements, unless somebody else here has that exact vehicle and knows off hand. Even then we don't know how much the dirver is willing to sacrifice. haha the driver dosnt care about space. i almost convinced him to wall his car. but i dont know much at all about that stuff and i dont really have that much time to blow.
-
yeah i would go measure it right now but its not my car... but ill try to get the numbers tmrw. or maybe he can txt me them but im not sure. ill ask
-
I mean seal the seperate speakers from eachother not a "sealed box" just if there would be any confusion
-
He lows hit way harder with the windows down. With the windows down it's just louder all around. But very much so with the windows down. But I want to say iv read something about he port size has something to do with it or thee box size.... Not sure
-
thats supposed to say alright. not sprint...
-
You guys all talked me right out of that Idea real quick! Lol but thank you for all the advice! Now to think what I really want to do.. Damn lol
-
I'm 17 and about to go to college how do I make car audio a career?
-
So not much money in it? =( lol well what would have good money in it about car audio stuff?...