SamuelHermon

so what would be the best way to run rca for 6 amps? HU has 3 rca outputs front rear sub, and if i understand corectly i can only do 1 amp in master and 1 in slave, so this would b ring me down to 3 for my sub amps what would be the next route?

yes 6 15s-6 amps, also 1 amp off of front for tweets and 1 amp off rear for mids, total of 8 amps all together Why a amp for each sub? if i do an amp on each sub i can run at 2ohm load for starters and if i decide to down the road i can add a 2nd woofer on each amp

yes 6 15s-6 amps, also 1 amp off of front for tweets and 1 amp off rear for mids, total of 8 amps all together

so i was surfing the web and came across another forum were a guy says he wired 3-diodes together and put it on his electrical and it went from 14.10 to 15.45, so my ? is what exactly causes this to work and were do you wire them in at? it looked as tho it was on the alt, wiring?

my buddy is in need of 3x 5' sections of 1/0 awg or = of welding cable, for big3 dont care about the color(if you happen to have small sections layin around), or if its 1 or 3 pieces, we live in Colorado, if you can help us out my number is 970-599-4197

my friend is ordering a Audiopipe Ap-15001d, so ill get to see it soon, but does any one have much experience with the AUDIOPIPE AP-D series, like the 15001, 18001, 30001 real power, clipping, protect, ohm load used, any real info of it in use i was thanking of getting the crescendos but im reconsidering what im going to use for my setup so any real info would be helpful

im not sure if this is were to ask or if it should be in the electronics and computer section if its the wrong section can someone please move it for me thanks i was wondering what some of the FREE soft were programes pepole are using to cofigure there builds and outputs are? also what would be a good programe to get if i was to buy one?

Good choices for the budget! What VC config do you plan on ordering? i told him to order it as a D4 so the one can be loaded @2ohm(around 300-600 rms not sure what the actual output is) and hell still have the opption to get a 2nd D4 and the amp is 1ohm stable

so my buddy is really cheap, hes not into heavy bass but does like a little bit, but like i said realy a big cheap sk8, hes been looking on amazon at amps and subs/enclosures, hes been looking at Dual-Pyle-Pyramid-Boss-Lanzar-Planetaudio-Mtx-etc...(huno cheap stuff), i told him to hold off give me a couple of days see what i can come up with, he wants 12's but i thank he might go for some 10's, remember hes a cheap $#@, hes looking to spend around 200-250, again hes cheap if you have any suggestions (besides quiting beeing cheap) or have something youd part with, fell free to text me Samuel 970-599-4197 or him Joe 970-388-5652 (hell just ask me what i thank so itll come back to me anyways) i have wiring and a HU for him and some xplod's for his doors, thanks Samuel

thanks appreciated

were do i find the free design

this was very helpfull, i to have an explorer a 94 i was thanking on doing a wall in the cargo(3rd rowseating) but maybe i should rethink this option

hes ordering the 15" dgon when he getts home from work, so i need help with a box design please max space avalibale is 17H x 41W x 26D and is the box single double tripled, how thick is the material, facing what direction(vent/woofer) please note that the only tools i have are, circle saw, jig saw, drill, cocking gun,Tape measure, chock line, triangle(rest of my tools are in storage) thanks everybody Samuel o and hes getting the audiopipe ap-10001d

thanks everyone i sat down with him about hour ago and he said find me an amp for 150.00 and ill get that this check find me subs/box for 250.00 and ill get them next check (i gave him door Speakers-HU-Wiring already) weve made progress

soory put this in wrong spot

can any one tell me if i get a head unit that has video input feeds can i wire a "BACK-UP" camera to stay on and work as a "REAR VIEW" mirror on my head unit???

okay thanks for the input and help very much appreciated the law here in Colorado requires 42-4-226. Mirrors - exterior placements. (1) Every motor vehicle shall be equipped with a mirror or mirrors so located and so constructed as to reflect to the driver a free and unobstructed view of the highway for a distance of at least two hundred feet to the rear of such vehicle. (2) Whenever any motor vehicle is not equipped with a rear window and rear side windows or has a rear window and rear side windows composed of, covered by, or treated with any material or component which, when viewed from the position of the driver, obstructs the rear view of the driver or makes such window or windows nontransparent, or whenever any motor vehicle is towing another vehicle or trailer or carrying any load or cargo or object which obstructs the rear view of the driver, such vehicle shall be equipped with an exterior mirror on each side so located with respect to the position of the driver as to comply with the visual requirement of subsection (1) of this section. This subsection (2) shall not apply to neighborhood electric vehicles. (3) Any person who violates any provision of this section commits a class B traffic infraction. Source: L. 94: Entire title amended with relocations, p. 2261, § 1, effective January 1, 1995. L. 97: (2) amended, p. 393, § 5, effective August 6. Editor's note: This section was formerly numbered as 42-4-223 and the former section 42-4-226 was relocated to section 42-4-229.

building a wall

these are the head units i was looking at Power Acoustik PTID-8920B or Pyle PLTS78DUB these are the cameras i was thanking about getting PYLE PLCM22IR or Koolertron Rear View License Plate Backup CMOS Camera

next ? sholud i wire it to the ignition turn on

heres the pics Igive up

this is my first messurments for the enclosure for my explorer its my max space, did i do it right so fare? sorry for the stupid pics still havent learnd how to use box builder programes TOP TO BOTTOM GREEN: Roof Vault – (W) 41”-52” x (H) 3” x (D) 26” = (0.92 cube) RED: Main Body – (W) 52” x (H) 27” x (D) 26” = (18.26 cube) Blue: Bottom Between Wheelwell – (W) 41” x (H) 5.75” (D) 26” = (2.38 cube) Total Volume Available Before Port/Woofer Displacement: 0.92+18.26+2.38= 21.56 cube(I thank) Plain Enclosure (outer dimension) (W) 41” x (H) 35.75” x (D) 26” Total Volume Available Before Port/Woofer Displacement: 19.18 cube(I thank)

sorry pics didnt post, kiss???

so is a second stock alt going to be as good as an ho alt?? the town i live in has an auto program at college that i can get a alt from a junk yard for $$22.00 and they well clean up and run through it for me, (im waiting on a call back from them to se if they can recoil it as well) and they have a fabricating shop that for the price of materials well make a mounting bracket also i know that there are alot of car audio specific companys that make batteries, but would 1 everlast maxx 1N under hood(replace stock) and 4 in back(total 5) be just as good as 3 audio batteries? i can get the ELmaxx1N's for 89.99 apeice so like 450.00 for 5 batts?? just woundering

i understand what your saying about the multable alt im going to a junkyard tomorow with my partner(he needs a sering colum) its about 20min from me they have som ambulances ill check them to see if they have any alts in them there 65.00 there but thats a 280A alt if i can find one sorry there actualy 270A