rcb054

That really blows...i just bought the amp, and its the first time its ever been hooked up.

hmm possibly...but what could be wrong with the amp? Its a brand new amplifier

I am running my 15" Q in a sealed enclosure, off of a RF t10001bd. The sub is making like a zapping, "electrical" type noise, Even when I turn the music at the head unit off, and disconnect the RCAs from the amp, the sub continually makes this strange noise.

Its 4 ga. wire and the fuse, im not sure what size it is, but not small. The other thing I just noticed, is that there is all this red liquid all over the battery. Any ideas?

I was driving down the road today 10 minutes after installing the new system (15" Q and a RF TB10001bd), and everything goes out. I get home, and check under the hood and the fuse is blown by the battery. Any idea why it blew??

email sent

I am having a problem fitting my 15" Q in my trunk, I have built a box and there is just no way to make it happen...is there any chance I can switch and get the 12" Q? I know its a lot to ask, but I have the 15" Q, its never been run, and I still have the packaging so I can ship it back to you. Let me know what you can do.

and you might want to check your amp...those BL's can handle more power then that, esp. with the added options.

I need to wire my 15" Q for a 1ohm load, and I was wondering what the best way to wire it is? Its the DVC 2ohm version Q. Something like this? http://www.rockfordfosgate.com/rftech/woof...mp;woofer_imp=3

OKay I will use titebond glue instead, and pre-drill. I also was told to use fiberglass resin to coat the inside of the box to make it more secure...is this okay? As for doubling up the front baffle...what do you think is the best way??

whats the downside to liquid nails? Also does it matter what type of screws? I was going to use drywall screws and then mount the sub with some heavy duty screws.

I know the routine in making a sealed enclosure but have a few questions before I begin.... This is the first one I am making for my 15" Q and I am getting 3/4 mdf and using 1.5" on the front where the sub is mounted. I was planning on using liquid nails to glue the boards together and then screw them- should I then caulk around the inside after that? Also when doubling up the front baffle, should I just glue and screw two pieces of 3/4 mdf together and then attach to the rest of the box and cut my sub hole in both? Any other tips, or things I forgot before I start building? Thanks guys for the help!

3CF sealed...how do you like the sealed...I am debating between ported and sealed...?

I cant decide wether to go sealed or ported with my 15" Q...I listen to mostly rap and want good sq bass but at the same time so good loud hard hitting bass...whats your guys vote?