1200 bandit

I like!!!!

My son is using two 1500d's on a 12" Nigthshade and he loves them, but be sure to stay at 1ohm and up.Good luck

O.k. back to the topic, yes I heard of Audioque hdc3 woofers I used them ( the 15's) a few years ago. I liked the subs for spl but not so much for music or sq. If you want to use the 2-12 that amp will work just fine. Audioque optimum performance will be in a vented enclsure.Good luck

x2

The AudioQue's are great subs for the money and will handle 3000 rms. If my budget was $2000.00 I would do the HDC3,there amps are too.

Just hit edit at the bottom rigth of the post you what to fix.

Great info.... what is your total budget so we can plan your set-up rigth? Do not forget wire,sound damping, mdf and more. Suggestions guys?

I own two of the subwoofers on your list, the T3 Audio TSNS 15 and the Nigthshade 12. I had 2 Massive Audio p1500 on the Nigthshade daily and the sub did fine. Now as for the TSNS 15 NO COMMENT. My son is using the Nigthshade now with one Audiopipe 3000 for powwer and I think the sub is laughing at him. P.S. make sure you give lots of information when you start a topic/post, it will help us to understand your questions or goals better. Good luck and welcome to the forum.

My two cents say go with the back seat out and the BIG port enclosure. You can play with the tuning of the enclosure to get it where it is loud but still clean. You also can use gain or/bass control to make it more boomy when you like. Good luck. P.S. your question was very easy for me to understand.

Cool I will post when done.

I'm testing the battery just to know the real numbers, it may have 2250 cca or it may have 100 cca I just want to know. P.S. I'm on your side man, I think the numbers are funny.

The Battery Specialists in my city has the tester I do not.

Just got the sk-bt100 today, I will start test next week for some real world numbers like cca/ca I will also post my notes.

Nice worK!!!!

I have seen the same here,recheck the grounds and power wires big wire don't like to be crimped. Also when doing the big 3 I allways solder becaues it is to much work to go back and re-do loose crimps.

Looks great Jacob. What is the optimum ported enclosure volume and rms, also what is the mounting depth?

Sounds like something is loose.Check your grounds, positves, and remote wires and also I would not use that isolator.

I have used the DB Electrical and it worked just fine for me, and more amps is always a plus.

You guys did great that install is bad ass!

Nice list of good shit.

When will you be ready for pre-orders?

I need and want one with money in hand.