SacredTanakh

Bass Ballin by Dj Billy E/Bass Mekanik

Everything was taken out after it was in an accident for the insurance inspection. But that has stalled for quite some time because the other person lied about what happened, and is now suing me for his "medical bills". Which he told everyone afterward including his family and a cop that he was completely fine. It was completely his fault and I'm getting screwed over on the whole thing. Going to sue him to pay for the damage to my truck though. The plans when it does become a project again is to do all the bodywork, rebuild the rear end, then strip the interior and start on a system. Probably going to do Incriminator, as I have wanted to use their equipment for a long time. Who knows when that will be though as I am finishing up the build in the 300 currently.

I've only had them hooked up free air to my home receiver and so far they sound very well balanced. I think they were definitely what I was looking for.

I bought the neo pro 10s instead of the faitials. The neo pros seemed to have a great following. Right now the aurum cantus ac165/50c2c s are in the doors. It took quite awhile to set the crossovers perfectly but they sound pretty good atm. Although I have a gap between the 63 hz low pass for the subs and the 80 hz high pass for the mids.

Thanks Port is going to be painted white. I have some black leather that matches my interior fairly well for the front, and I don't think I have enough leather to do the sides too. So probably black carpet on the side beauty panels.

worked from 10am yesterday to 12am today and got it playing. Its extremely loud, but it doesn't play the lows as well as I had hoped. I think once its sealed off a bit more it will get better, plus one of the woofers hasn't been broken in. So far I'm pretty happy with it, but now I need sound deadener for sure.

Oh you guys have switched it up a bit, Looking forward to seeing the SSA Tahoe though. Should be intense! :3

Considering what they have for equipment I would definitely agree.

Thanks guys, Its getting there I'm hoping with the smaller airspace for the subs I can get a real musical response out of them.

Mark has 2 SSA Evils, and Aaron I believe has an Fcon Prototype 10. so not much of a contest haha.

Box turned out a little smaller then I wanted because of the port being double baffled, and more displacements then I anticipated. Its about 6.4 cubes per woofer, 5.5 cubes for the port, tuned to 30hz. All that's left to cut is the front baffle, which will be double baffled as well with a flush mounted holes for the woofers. It took about 7 sheets of wood for all this.

My friend had similar issues with his kenwood single din, but it would also occasionally send huge pops. Even if we had the gain all the way down on the amps it would burst out the subs and door speakers very loudly. Also while playing the bass would flutter and sound distorted. I checked everything you checked, and the only thing that worked was putting a new head unit in. So If I were you I'd save anymore time, and do an early upgrade to whatever head unit you desire

That's what I was thinking, I ended up making the port as shown above but double baffled with a slant on the back port so that both ends of the port are the same overall length. Btw anybody know the easiest way to get a 2 70 pound 18s in a flush mounted wall haha?

I've never heard it would be a problem to put an angle like that. That being said I'm going to do it anyway cause it's already built, and it's for 2 18s. I believe it has something to do with how the subs are pressurizing the internal enclosure. I've seen it happen in person lol. Hmm well there are lots of ported wedge enclosures that do fine, so I don't see why it wouldn't on a larger scale.

I've never heard it would be a problem to put an angle like that. That being said I'm going to do it anyway cause it's already built, and it's for 2 18s.

Not using an aero.. and I don't think there is enough space for an octoport. But I could cut the back piece of the port at angle to where the whole port is the same length. But it would look a little strange. edit: I just tested to see if two 4.5in sided octoports would work and it would have to make a bend.

The Sp4 is not the only woofer that catches fire.. Just because you haven't seen or heard doesn't mean it doesn't happen.

Fairly sure they have wardens in that Challenger, But I could be wrong. Hopefully Ill get a chance to run some Incriminator gear in the next few years, have to finish this build first though (Which is actually Fi and Crescendo) Very nice! Were you up at SBN too? did you compete? I was not at SBN, hopefully next year! Its a long road trip from AK. I only know that challenger cause I keep up with most of the large builds that I can, on forums, and youtube.

The new leads have studs with a nut instead of a push terminal, so it'd be pretty obvious it was different from the old style. Also I have never had any issues with my sp4s, even running 4k to one for over 6 months. So I still think its user error no matter what people claim.

Fairly sure they have wardens in that Challenger, But I could be wrong. Hopefully Ill get a chance to run some Incriminator gear in the next few years, have to finish this build first though (Which is actually Fi and Crescendo)

"Pro Audio Style" is how sundown describes them, so try not to nitpick so much.

I agree with Swift, but if you are dead set on pro audio. The Sundown Neo Pros come with grills, and also have a slightly smaller mounting depth (3.5in). But they are 3x the price of the pwxs.

Since the Knukoncepts kables were mentioned I'd like to say that although their krystal kables look very nice and seem of good quality the connections themselves are very inconsistent. Every single one seemed to fit on differently, some were unusably loose out of the box and some were very tight. I had to crimp most of them into fitting decently. I bought them more for looks than thinking I would hear a difference. Time will tell if they were a good purchase.

Those look beefy as hell! When recone my SP4s hopefully these will be standard.