Jump to content

TribeamConnek

Members
 View Profile  See their activity

  • Content Count

    156

  • Joined

  • Last visited

Posts posted by TribeamConnek

  1. Posted

    I wanted to know if anyone else has had this problem yet.  Im working on a new build in a blazer everything is going well so far.  Im just trying to get the last part of my electrical straight before I build the enclosure.  I have a singer 350a alt and I decided to add a mechman vcm.  Everything has been hooked up properly but Im not getting any power to the vcm.  I checked over wires and made sure I was getting voltage and everything checks out fine.  I happened to notice that the plug which hooks up to the alt has one red wire.  The plug happens to have 4 prongs.  I wanted to know if that could be the reason for things not working as they should.

    0

  2. Posted

    I am currently working on a build in a 2000 chevy blazer.  Everything has been going well up until now.  I purchased a singer alt and decided to go ahead and purchase a mechman vcm.  Everything has been hooked up to see if the alt was charging and its working fine.  When I hooked up the vcm Im not getting any power to the unit.  I went back to check the wires and to see if I was getting voltage from the ignition feed and everything is fine.  I did notice however that the plug going to the alt only has one wire when its a four pronged plug.  I wanted to know if that was the reason for things not working properly.

    0

  4. Posted

    1. I am an owner of IA. Haven't been posting any updates, but I will say that I love my gear. Plan to do an upgrade but I have yet to get around to it. They still do damage for the power that they are on and I hear people tell me all the time that I am the loudest they have heard. Some of these people go to carshows and witness a lot of cars, but still tell me that my setup is louder.

    0

  5. Posted

    I've got a 21 basket on a dr motor I can take off and a dp motor but it doesn't have the plastic pole plug on it.

    Thanks for you help! I was hoping to have more input on this, but I guess I will have to keep looking.

    How easy would it be to find a plastic pole plug for it. I know it should be a decent amount of parts floating around for this woofer.

    0

  11. Posted

    Did you end up doubling the MDF or leaving it at a single layer all around?

    It was always doubled up, but I wanted to add a third layer on the front. Really its only the beauty board that was left to be added on the front, but that can be added anytime. She is solid. In fact I did a vid while I was building it showing how sturdy the baffle was. I put a remote on the baffle and it didn't move.

    0

  13. Posted

    how many alts you got in there? even underpowered, more cone area is more output per watt...better efficiency

    There is only one at the moment. I am trying to see if I can get a bracket made for another. Its hard finding things for a dodge. I may switch to a 14v setup in the future.

    whats your voltage now?

    It sits at 14.5 or 14.6 I want to upgrade to an external regulator and run at 15.8v.

    0

  14. Posted

    how many alts you got in there? even underpowered, more cone area is more output per watt...better efficiency

    There is only one at the moment. I am trying to see if I can get a bracket made for another. Its hard finding things for a dodge. I may switch to a 14v setup in the future.

    0

  17. Posted

    Have you got metered yet? I'm debating on gettin 2 of these or 6 sundown sa12s when i get back from my upcoming deployment. What are you tuned to?

    Sorry, we don't have a shop around here with one. Its tuned @28hz. These things are loud with the power I am giving them now. They need more power.

    0
×