criticalaudioinc

will be louder strapped i have tested this with my 2 3000s with 2 fi btls 12s fully loaded but different subs could mean the difference

so your recommeneding 4 runs of + and 4 runs of - is that correct then the same between each battery if thats correct?

is there a reason why it cant be grounded to the chassis of the vehicle? jw cause i learned that longer your ground the more resistance in the voltage

also do the grounds have to be ran the same as the power or if i have a ground area on the car can i do that also would save some wire for possibly more runs and thanks again for the help

shouldnt be a problem i will do two runs tomorrow and connect it to the alt and fuse it and see how it goes also need to finsh the big 3

also what you think of running the runs of wire directly from the alt? been wondering but never seen it done. i have a bus bar i can custom make for it. i have a exessive amperage 250 amp alt might not be a bad idea but then again it could

adding the two runs tomorrow then i will just double grounw the batteries which wont be to bad at all might do three runs have to see how much wire i have

theres a battery for each in the back so should i run 2 runs to each battery? or 4 runs to each battery?

2 sundown saz3000ds at 2 ohm strapped and 2 fi btls fully loaded

Alright guys need some help here, since my car is in the shop and there working on the front im allowed to work with the stereo. Now i have 1 run of o gauge power wire from my front bat to the back to bats and i ahve a 200 amp alt should i add another run or two or is one run fine? just kinda wondering and i got 0 gauge jsut sitting aorund i need to use lol

send me a email at mayc@criticalaudioinc.com and i will get a good price for ya. do you want it a certain color?

what kind of car and i would recommmend exessive amperage and ohio generator http://www.excessiveamperage.com/

i have two 3000ds im using a 200 amp exessive amperage alt and two yellow tops and im staying at about 14.8 you would be set

heres some pics of setup its still in the works but should have it done tmorrow

well i can get a 300 amp alt and do the 2 yellow tops temp for now until i can get the 4 kinentiks again kinda wish i didnt sell them but 350 a piece i couldnt pass i jsut hope the 125 amp alt will last until the new one get here. how low can the voltage go before the amps are in danger? i know it should drop no more then 11.5 but i think thats pushing it