bighitter

Upgraded casing and components inside and the ability to strap. my SAE1000D booklet says they can be strapped to make 1800w @ 2 ohms. Mine says the same and jacob has confirmed it before. They dont have the upgraded internals, casing or the ability to handle 16v (speaking about the SAE1000D obviously)

Jacob, How would these compare SQ wise to my SD1v2 10" prototypes? I would be pushing them with the 1000D, got a blazer now so mounting depth isnt a problem but I dont want to take up the whole cargo area either.

FYI, if you are running optical or digital coaxial you will only get 5.1 at max, the newer 7.1 formats are only sent via HDMI digitally or already decoded via 7.1 analog output if your player has this output. But you are correct not all blu-rays are 7.1 Impressive build so far, more impressive is your lady helping.

Once you buy them you are free to do whatever you want with them Glad to see these things are moving forward, mine are still sounding great! They seemed to have broken in even farther since OTIV.

I think just calling this an SQ sub would be misleading as it is capable of some serious SPL output.

I think these 10s will surprise most people, especially considering their shallow mounting depth.

Have to ask Jacob on that one as I am not sure. I do know that it is pushing my current CDTs very well and will soon be pushing a 3way CDT ES 06+ setup.

Are you still in FL and if so where? I am in the west palm area and have a full Sundown setup in my truck and was able to hit above 140 easily with some very sweet sounding SD1v2 10s.

Well it wasn't a TL but my sencore SP395 should be a little bit more accurate, I was able to get 146.2 off the dash with a bass mechanic CD. I think the SD1v2's are ready for production.

That is correct, it is the prototype thats why there is no model number on the amp. I might as well be the proto truck as I also have the SD-1v2 prototypes and they are amazing. So far very happy with the upgrade, now if it would stop pouring long enough for me to get out there and be able to properly setup/tune the system.

SWEET! Very glad to hear this! You will have a good time and see alot of different applications of some of your equipment. http://www.old-town.com/visit.html It will start at 8am and go to about 5pm or so.

Well first off I have to say thanks to James and Jacob for the great work they have done and the products they have given me access to that I would not have been aware of... Firstly, Here are some new toys... Here are a few pics of the stuff roughly installed with no clean up of the wires. I will take better pictures once it clears up outside and I can getter better angles. Showing how the box contours to the seat... Other side of the box with the 60% of the rear seat down... Showing driver side of box and its contour like the seat. Clearance under the seats... Anyways on to initial thoughts.... Ohh My are these nice... Just had the 250.2 hooked up to the CDTs gained all the way down and noticed a much improved midrange and headroom. After finally running up to Lowes for some new quick connects I got everything fully hooked up and did a very quick gain adjustment. The SD-1v2s are simply amazing, they are accurate and precise in a way that I haven't heard often outside of a real theater. They are also very capable subs that can put down some serious SPL for 10s. I really haven't tweaked anything yet so these are just initial thoughts and more will be posted once I have had a longer time to listen and tweak the setup.

That the nightshade proto?

So you going to bring those down for me to listen too?

Or better yet you can come to the meet and see all the interest for yourself! And bring the SD-1v2s with you!