Dexter Chaos

for polishing you if you have 6 inch grinder you can get polishing pads for it which would make you polishing much easier. or look at a scotch brite pad for the 6 inch pedestal grinder. it could be less time consuming

You haven't stated you whether you have the big3 done. Just want to check. This helps As well

This is epic stuff!!!!!!

I have two Zcon 12's D1 i would like to trade/sell. These are amazing subs I just do not have the trunk space for them. I am looking for Icons or Xcons in 10 inch if you like to work out a trade. Starting price is 400 each + shipping. obo These subs where received in October of 2013 and been running them of a Sundown SAZ-3500D. amp never saw voltage lower than 14 volts. I REALLY have enjoyed these just don't have the room I feel they need. Let me know if you interested Here are some pics from December when I had them out last while changing the enclosure. I will post a pic later with my info on it. sorry the delay on that I know the rules. Also one one of them during install screwdriver slipped and damaged cone. It did not go all the way through. Just let me know.

Sounds exciting

Are you making or plan on making a 10 inch sub?

Sorry if I missed this somewhere but can i run these sealed? or will then need to be ported?

i would like a ten with some BALLS as you put it

Here are the pics this is the pic of the screwdriver mark.

Thanks Wish i had more room these subs are amazing.

Thanks goal is by the end of the year for the holiday season along th goal is by the end of the year for the holiday season along with 18's

x3 great dude

i am currently looking at changing my set up and was considering to build with 10" xcons. I am looking at aero port for my box build curious what type of port area I need to be looking for? or is some one can let me know how to calculate this. Thanks.

I have been using the bit pusher. Trying to understand the velocity. Aka vent Mach but any information is useful to help me. But please speak in lemans I am by no means well versed in audio terminology.

I haven't ordered subs so not sure. But they could be wired at .67, 1.5 if I get d1 subs and if I get d2 then 1.34. Can you tell me why this pertains to my question so I can understand? Max box size is 15 high x 37 wide x 34 deep.

there will be 3 subs on a saz 3500

That's sucks about your amp

Vehicle : 2007 chrysler sebring Location in the vehicle: trunk Space available (Length x Width x Height): 37 wide x 32 length x 13 height i can get larger just would have to build inside trunk. Subwoofer make and model: Zcon D1 Subwoofer Size: 12 Number of Subwoofers:1 Type of Port (Kerfed, Slot, Aero, etc.): slot or aero What type of music do you like?: dubstep and decaf Is your goal SPL or Everyday Music?: most of my listening is everyday music decaf and dubstep. Tuning Freq (Hz): not sure Volume : currectly around 7 gross Questions: I have 2 zcons and am thinking of going to 1 due to rebuild thoughts. I need to give these subs more space and not sure i can do that with one. since rebuild was in mind thought possible 4th order and wanted thoughts on the sealed size requirements for this particular sub. I listen to alot of hip-hop, rap music, decaf, djsnt, dubstep, and anything that makes it rattle my teeth which I am finding out covers a large frequency range. not sure if the 4th order box is my best choice but what i have read it can have a flat response so that would be helpful. I am new to ported enclosures always ran sealed and feel that i am in over my head. just want my subs to sound better then they do now. all help is greatly appreciated and thankful for. I claim to know nothing

So how do you calculate the sealed side for a sub, you see these builds with multiple subs and are sealed that fire into a second enclosure with a port. My question is how do you know how to determine the sealed side of this box?

two subs and port firing in cabin. I know my box is two small and need to rebuild. that is why I am asking these questions. So I am going to only use one sub until it warms to where I can really rebuild. I guess it is called a bandpass box. sealed on one side and ported out the other. wanted to know what determines the sealed size for this type of build. just a thought. just seen alot of cars built with these types of boxes. thought I give it a go. but what do I know nothing obviously.

Pre orders open when???

this was a good read just found it thought it could help others.

what are you wanting to change from your old box.