layedouton20s

it does but it wont change the size of the box need. if it does it will be minimal

does it matter if you use a deep cycle or a "wet" battery for stereos?

i have a fosgate t1500 thats at 1745 watts and have 2 batts and i only see voltage loss at full tilt

alls i can say about my amp is fosgate t1500 1801 rms going to 2 ssd 10s it pound like a mofo

thats all they did for me and i got the subs in 6 days

i know i should be emailing this but what do the assasin 8s cost?

i just need to know how to calculate the port and what to tune it to

i have around 9in bottom depth and 3in top depth and 53in wide 22in tall but i want to cut out a slot for my amp that is 14in long and like 9in tall and 2 1/4in deep those numbers can change a little bit but i wouldnt like them to. i plugged all those numbers into the 12 volt and it came to 2.75 cubes before disp. thats where i get confused.

im looking to port my 2 10in ssds in my standard cab truck was wondering what the mleast amount of airspace i would need after all disp. more less i dont know what to tune it to and i dont know if i should use a slot port or a round. if someone can figure out some dimensions for me that would be greatly apprieciated. they are powered by a t1500

im sure someone will already say this but searching a heathy thing but a fosgate t4k would work. what vc config do you have

4 gauge is way too big for speakers use some 10 or 12

i vote the dekas

i wasnt trying to be an ass. there are people who have done this on s10s but they have cut the back of the wall and used a flat piece of steel but the s10s have ribs on the back of the cab. do the dakotas have ribs or anything like that? i think it will work but it obviously depends on what subs you are putting in there do to the flexing.

is that for you nightshades? is it supposed to fit in the trunk of the towncar

i took it as you cant do a wall or something like that maybe thats what he thought. i would hate to say it but explaining>you