basshead08
-
Content Count
184 -
Joined
-
Last visited
Posts posted by basshead08
-
-
Here is the soundstream...
http://cgi.ebay.com/NEW-SOUNDSTREAM-XTA105...1QQcmdZViewItem
and I have also heard that db drive were pretty good budget amps. Does anyone know anything about their speed series 1000.1?
Just found another one
http://cgi.ebay.com/NEW-US-AMPS-2000-WATT-...1QQcmdZViewItem
0 -
Well what abnout soundstream? Are they reputable and if not where can I get a decent one in my price range?
0 -
I have an ssa icon 15 dual 2 ohm and I am looking for a new amp to run it. These are the two I have found ...
http://cgi.ebay.com/NEW-SOUNDSTREAM-...QQcmdZViewItem
http://cgi.ebay.com/NEW-HIFONICS-TXI...QQcmdZViewItem
any suggestions would be helpful my budget is about $250
0 -
Is the 40.1 ever gonna go back into production again? If so when would be an estimated year of release. This is really more curiosity than anything but if there is one I would definitely want one.
0 -
That was gonna be my next question. Would it be ok to rhino line over the spectrum?
0 -
I am planning a blowthrough in my gmc truck and I have a question... What shoould I use to deaden the bed? Do I just use the damplifier pro or should I use something similar to spectrum to spray in the bed?
0 -
Can anyone give me the measurements dimensions for the 40.1? (lxwxh)
0 -
DJ suggests NOT to be using box building software for their subs.Software is highly inaccurate for their product line.
It shows that for the original HD3s that you needed a 9 cuft ported box for just 1 15, that was way wrong.
I don't think he's using software. Its being designed by somone on a different forum. He just said it would help if he had the parameters.
0 -
I called DJ at AQ and he said that they didn't currently have the specs because the subs had not gotten back from production or something like that. I was just hoping that someone on here had prior experience with either.
0 -
Does anyone know where the t/s parameters to the 18's of either the 9500 or the hdc3 can be found? I am trying to get a box designed but the companies don't have them posted that I can see.
0 -
Is there anyone on here that I can pm about getting a box design done?
0 -
It will be at a 1 ohm load for daily and streetbeat5
0 -
I am planning on running the ia 40.1 on a 16 volt charging system. I have no experience with this amp so heres my question...How many amps worth of alternator and how many amp hours do I need in my battery bank?
0 -
Can it take a 16 volt charging system like the 40.1
0 -
bump...No opinions? Any and all help will be much appreciated.
0 -
I am getting ready to do a blowthrough in my truck. The subs I am planning on using are 4 Audioque hdc3 18's. The dimensions are 50x17.5x77 inches. I will be running them off of two IA 40.1's strapped. I have built several boxes but never a blowthrough. I have heard that bandpass is the best way to go when doing a blowthrough...is this true? Anyway is there anyone who can design me an enclosure for this setup? I will pay of course just let me know.
0 -
yeah there is no distortion or smells. I have the sub mounted in a center console enclosure and when reached to get something out of the passenger seat I just noticed that it ws warm. Thanks for the advice.
0 -
Okay I have a icon 15 and inverted with the basket outside of the box and today as I was getting outta my truck, I touched the magnet and it was considerably warm.., s this normal or is the sub getting too hot?
0 -
If installed correctly, three should be louder. If you are going to compete at all, it would be worth it. If it was mine, and the only decision was two or three subs, I would go for three. . .If you have the electrical system (sounds like you do), I would do two 18's and use the money saved on the third sub for more power. A pair of BTL's will handle a pair of 40.1's if you know what you are doing. . .Or pick up a pair of Sundown 3000D's.
So which would you do? 2 or 3 BTL'S?
0 -
So three 18's wouldn't be noticeably louder than two.
0 -
Personally I think running at .5ohm daily is way too low and dangerous... why not gettin somethin like a sundown saz3000d on each one and put them @ 1ohm? And why 3? theres really not that much of a noticeable difference from 2... Have you ever heard the 3db rule? To gain an extra 3db you either double your power or double the cone area.... which in your case you would notice a difference if you ran 4 instead of 3... 3 will be a waste of space.. if you want more than 2 and you can fit it do 4If the amp is stable at 0.5 ohm then why would it be dangerous? And also 3 BTL couldn't be over powered by that amp but two could so the third one is ind of a better safe than sorry kinda deal.
0 -
Sorry about the multiple post Im experiencing some technical difficulty with my internet. Anyway what I would really like to do is 3 BTL 18's powered by the ia 40.1 on 17 volts charging running at 0.5 ohms. What do you guys think?
0 -
if you're gonna get a btl...you're going to want it fully loaded. putting 3k watts on them would be easy enough i'd say. anything more and you're gonna want to make sure the box is perfect and everything else. it can be done...it just gets more dangerous after that.i have 4 15's fully loaded for sale too btw
Well in that case, I am looking at 2 BTL 18's fully loaded, or 2 IA Death Penalty 21's
0 -
if you're gonna get a btl...you're going to want it fully loaded. putting 3k watts on them would be easy enough i'd say. anything more and you're gonna want to make sure the box is perfect and everything else. it can be done...it just gets more dangerous after that.i have 4 15's fully loaded for sale too btw
Actually I am looking at 2 BTL 18's fully loaded, or 2 IA Death Penalty 21's
0
looking for a new amp
in Amplifiers / Head Units / Processors / Electrical
Posted
What about the db drive 1000.1?