fjcruisin

man compare to FJ your floors are really flat, looks like it will fairly easy to get it done up. Do twice what you are thinking on the roof, and go up as high on the fire wall as you can get.... I put in 240 sq. ft. of damplifier pro, 36 sq. ft. of overkill pro, a gallon of spectrum, 6 sheets of luxury liner, 3 cans of spray foam, and a whole bunch of insulation.... my sound deadener install part 1 this was a few extras I did later, kind of a long read part 2. this is what I did last week. part 3, with some new equipment to go with it....

got the amp installed, made a little MDF "rack" to mount it on, ran new stinger HPM level 3 RCAs , Knukonceptz 1/0 wires, and put in my JL XR 650-CSi comps in the back seats, with a whole bunch more second skin stuff... this is second skin dampi pro and was put down six months ago , two layers on the floor, 3 in the roof, overkill pro in the roof and cargo area, inner and outer door skins done, 1 gallon of spectrum, 3 cans of spray foam, and a bunch insulation in the rear door, and quarter panels... This is the new Luxury Liner Love the amp... Good Gawd, way better than the Kenwood Excelon it replaced. Sundown Audio FTW.... Second Skin FTW.... JL XR Comps FTW.... So now I am running a set of the 3-way comps, the 2-way comps, a XXV-01D excelon Head unit, A sundown 4Ch. , Alpine MRD-M1005 amp, 2- 12" type R subs.... Sounds Amazing..!!!!!

Yeah so My 4 ch. came in a couple of days ago. But I am waiting on more sound deadener, 1/0 wire, new RCA cables, 1/0 gauge ring terminals, and my other set of JL audio comps. ( I ordered them a little later than I had planned ) - The ups guy is gonna hate me by the weeks end. I have spent close to 1400 bucks just doin some little "upgrades" . When I get it in I will come back and let you guys have a look.... cause I already have a boat load of second skin in there now, 2-12" alpine type-R subs ( doesn't everybody?) and a kenwood xxv-01D deck. I am thinking of building a more specifically tuned box for my subs too, cause I know they got more to give and that little alpine MRD-M1005 does a good job. If these subs that I have were dual 4 ohms, I would pick up a saz-1500 for em.

Run them at fill power. I run a set of Zapco Reference 6.5" comps off of a 100.4 BRIDGED (320-350wrms each) and have 0 issues. You just need to be aware of what your hearing. I almost always run double or triple to my drivers. You cannot beat the headroom. What do you mean double or triple, as in power ? and the headroom, you mean in the FJ - yeah I wouldn't trade it for anything now, aside from the fact that it has tons of second skin in it - I really like it. My amp is supposed to be here today

send irragi a email @ dominick@tds.net He takes a while to respond, but he is the only company who has said he can help me out. have patience and he will get back to you.

amp on the way....

I am gonna wait a few days for my paypal activity to settle down. I just sold 25 items on ebay. But its on for sure.

thanks I hope everyone pays tonight so I can order tomorrow.

everyone on the steve meade forum kept going on and on about how good sundown is, and I found the SSA store and the forum on the sundown site. I will be a sundown owner very soon.

I tried to post this under the SSA shop section, but this should do it here as well. First, I am planning to order a Sundown 100.4 tomorrow or tuesday, from SSA depending on how fast my winning bidders pay up on ebay. What I need to know is, Can a set of JL audio XR653 and a set of JL audio XR650csi ( the 3-way set and the 2-way set) be okay on this amp. JL says the RMS on these sets is around 75 watts , and I hear the sundowns are underrated. Will I benefit from this amp, will it need to be ran at a minimal power to preserve these speaker sets? I have a 2007 FJ cruiser, the 3ways are installed already - in the front doors and dash, and the two set is on its way here, to go into the wall about where the rear passengers elbow would hit if they were sitting in the back seats. I have the fronts on a Kenwood excelon KAC-X541, with the input sensitivity way down, and a Kenwood XXV-01D deck. It sounds good, but I dont think it is putting out anywhere near what it is rated at, and if turn up the input gains I drive the speakers into clipping. Either way I am taking out the kenwood amp and putting something else in there. thanks.