Jump to content

Kanaworm$

Moderators
  • Content Count

    6,886
  • Joined

  • Last visited

  • Days Won

    28

Everything posted by Kanaworm$

  1. Kanaworm$

    Lots of 18s

    That would be fun to be part of that build!
  2. That is some serious low end numbers!... :clap:
  3. Kanaworm$

    Hi, I'm rumproast789

    Welcome! ...
  4. Kanaworm$

    Suggestions and Advice!

    Recently got in on the Incriminator Black and Blue December sale and purchased a pair of D4 15" LI series subs. These will be going in a 1998 GMC Sierra 4X4 extended cab with 3rd door. Rear seat has been removed so I have the whole back area for subs, amps and batteries. This will be a daily driver with an emphasis on SQ but with the ability to get loud. No competing just enjoyment. What I am wondering is, what would be a good design for the box? Will be going ported tuned to 35Hz. Nick recommended 3-4 cubic feet and I forget how much sq. inch of port but I think 60". Can't get to my yahoo email since Im at work to check. I was thinking woofers front with a rear vented slot port firing into the corners of the back. Looking for some suggestions and advice on what would be good way to fire the woofers. This is a budget build since I have two kids in hockey, a wife and two 200lb dogs to feed.... Thanks in advance Curt System consists of the following HU: Sony CDX-GT710 Front Stage: Oz Audio Matrix Elite 130CS 5.25" in Custom Kicks Mid Bass: Dragster Audio Art 6.5" in factory door Front Stage Amp: Sundown SAX100.4D Subwoofers: Pair of Incriminator LI 15 D4 Sub Amp: Sundown SAZ1000D Alternator: Factory (Wating to see if upgrade needed) Front battery: Interstate Rear battery: Undecided (waiting to see if needed) Wiring: Misc Big 3: Complete with 4 gauge (Upgrade most likely with 0 Gauge)
  5. Kanaworm$

    Suggestions and Advice!

    The cut sheet specs are hosed up.
  6. Kanaworm$

    Suggestions and Advice!

    I just compared to the RE Box Calculator and came up with the same results.
  7. Kanaworm$

    Suggestions and Advice!

    Ok here is what I came up with for a box, external dimensions 52" wide x 22" high x 17" deep with 118" of port tuned to 34Hz. I used a 5.75" wide port. I used the SSA flash box calc to come up with the design. Anybody have any other recommendations? Im open to suggestions, advice or criticism...
  8. Kanaworm$

    Suggestions and Advice!

    Thanks for the advice guys. After doing more research and reading. I think I will go subs forward and port forward.
  9. Wow! Cannot wait to see what you get outta 4 Icons! The 2 were very impressive!
  10. Kanaworm$

    Noob here.

    Welcome! ...
  11. Kanaworm$

    1/0 awg monster

    should have read the title better....
  12. Kanaworm$

    1/0 awg monster

    Dang work blocks photobucket pics. What wire did you get?
  13. Kanaworm$

    2d blazer

    Should be more than enough. A friend of mine has a 2001 and he ran 20ft from his battery through a grommet on the drivers side with plenty left over.
  14. Kanaworm$

    4 E8's with a 15" PR

    Interesting build.. :bigclap: ..Keep the pics coming
  15. Eminence is another choice.
  16. Kanaworm$

    Pics of your pets!

    Here is a couple pics of my two dogs: Samson - 2 year old English mastiff Chase - 2 year old Yellow Lab Sam and Boots the cat, Sam was 4 months Chase at 4 months
  17. Kanaworm$

    HI

    Welcome...
  18. Kanaworm$

    FIBTL 15''

    Daily driver?
  19. Kanaworm$

    Second Skin Bed Liner -

    Second Skin "Bed Skin"
  20. Kanaworm$

    Happy Birthday Kent!!!

    Happy Belated B-Day....
  21. Kanaworm$

    Prototype Big Boy SPL Motor

    Serious prototype numbers! Can't wait to see more.
  22. Kanaworm$

    new member alan dante

    Welcome....
  23. Kanaworm$

    new

    Welcome! Your still being validated according to your group.
×