casedawg350

alright ill get on that this week. thanks guys! and yes, i am sponsored by KICKER.

my fuse is one where i have to strip wire, but a ring terminal on both ends, then put the terminal over the posts that i tighten the nut on that holds the fuse in place. i first used the terminals that came with the kit, i just smashed the wire into the terminal on the ground with a hammer (ik im a noob but it worked for the battery end). it slipped out when i was running my wire, so i started over with both ends, and used a vice this time to hold the wire into the terminal. they slipped out AGAIN, ( ) so then i said F it and just smashed the raw wire between the fuse and nut, lol. what should i do!? the fuse is just gonna be sitting under my back seat in my explorer if that makes any difference.

alright. can i just use a lot of electrical tape and the black pipe looking wire loom to get the 2 ends of the power wire back together where the fuse is now?

well, i already split the wire all the way under the back seat, so what should i do? i really dont wanna go buy all new power wire. i did have the terminals with the split, so i guess ill just buy more. none of this has worked out how i wanted it to.

heres my fuse.

YEAH! i was so mad. and i tightened it as hard as i could.

the fuse is the power wire one. i didnt put it under the hood by the battery cause there was no safe place. ill get a pic tonight and post it on here.

Yes alright thanks

i went to look in my sent pm's box and none of them are in there. anyone know why this might be?

alright thanks guys!

thanks a lot! do i have to check that for every message i wanna save?

can you tell me where that option is?

i drive an explorer, and im only gonna have 1 sub in a 2 cubic box. what are your guy's tips for keepin it in the middle right behind the back seat? thanks for any help you guys can give me. edit: DO NOT wanna drill into the floor.

what is the ib3 for?

WOW! as an ATV racer, just WOW!

i dont get it, what keeps the ply from moving with the box? The sheet would be as big as the cargo area and you would cut it to fit so it couldn't move. oh ok got it! ill have to see what i can do. thanks.

i dont get it, what keeps the ply from moving with the box?

yeah, id rather not drill through my hole cause my gas tank is under there. thanks for the input.

You will have to show pics of that one when it all done alright, ill have pics on here saturday night.

is 110 dollars for a carpeted, with terminal, 2 cubic feet tuned at 33hz box?

awesome. thanks a lot guys!

NO!! haha. my username over there is the same as it is on here, im not on there much though.

central indiana

no.

buddy of mine.