Julian

i dont think either for the first 5 days it was kicking so hard then one day it started to make the noise.

yeah i didnt realize that my ssf was on 35 hz i thought i turned it down but i didnt.

no not yet, i need to get my other amp.

im assuming its my fault </3 but i had my ssf at 35hz, and my gain at 4v. so i don't know what could of happened? Update: it doesnt even work now! won't even move, no burnt smell or anything!

im assuming its my fault </3 but i had my ssf at 35hz, and my gain at 4v. so i don't know what could of happened?

is there a number i can call them at?

yes, black to black red to red in parallel

yes i had a VERY reputable business make my box for me what's underloading?

amp is still kickin. dont have a meter, rca cables look good.

yes still making the sound when it hits low

update: i pushed and no scraping sounds happened.

i did buy this straight from them

bump please help someone from fi would be helpful.

yes for all of thoes

4 cubic ft box tuned to 32 hz, hifonics brutus bxi1208d a kinetik hc600 battery and 4gauge wiring running it.

i have a 15 bl running on a Brutus bxi1208d and it does about 950-1000 something watts at 1 ohm, which is fairly good. it Pounds like NONE other, and it does just fine for me.

(slightly off topic but) i have a 15 bl running on a brutus 1208ixd and it kicks HARD im sure its only running around 950-1000 watts rms but its fine for what i need it for

I just popped my FI cherry () and bought a FI 15 with cooling, daily, universal, and a red dustcap what kind of enclosure am i looking for? i have a 1995 lumina, and now im seeing what kind of box i should go for. ( i have a very large trunk. ) i think my MTX JH55 is a 4 cube box. and i still have room for a little more, could someone post the exact and best enclosure for the FI BL 15 thank you in advanced -Julian

what kind of enclosure am i looking for? i have a 1995 lumina, and now im seeing what kind of box i should go for. ( i have a very large trunk. ) i think my MTX JH55 is a 4 cube box. and i still have room for a little more, could someone post the exact and best enclosure for the FI BL 15? and is there any very good box builder for xp or vista? also could i get exact specs for the 15bl with cooling, daily, universal, and a red dustcap. ALSO would a hifonics 1200ixd amp wire at 1 ohm be ok to power this amazing sub?

i dont quite understand how to use the flash box calc could you do it for me or explain it? thank you 1 ohm btw Fs: 35.1 Hz | 34.5 Hz Re: 0.75 Ohms/coil | 1.5 Ohms/coil Qms: 6.23 | 6.34 Qes: .47 | .43 Qts: .44 | .40 Mms: 232g | 240g Cms: 0.089mm/N | 0.089mm/N Sd: 810cm^2 | 810cm^2 Vas: 81.6 l | 81.6 l Spl: 90.6dB 1W/1m | 90.7dB 1W/1m Bl: 12.8 N/A | 19.0 N/A Xmax: 21mm Rms: 1000W * Sealed box: N/A cuft Ported box: 2.8-4 cuft @ 30-37Hz Sub OD: 15.625

and is there a great box building program out there, i have bbp which doesnt tell me alot lol

yes (told ya i got a big trunk ) sedan ftw

18.75 length, height 15.75, and width around 50 or 60

for a daily scenario and be able to kick all the little punks butts with my superior stereo, hah what would be a good box builder to get the exact box and port sizes ?