Julian

Where did you pick your veneer up from? I really like the grain pattern, I was actually looking to find some similar to what you have but with a dark coffee color.

Add some variety with your workouts, it helped me. Here is my split Sun: Chest, Back, abs Mon: Arms, forearms, Shoulders Tue:Legs, lower back, abs Wed: Chest, Back, abs Thur: Arms, Forearms, Shoulder Fri, Legs, lower back, abs Sat: Rest Day So basically every single day biceps are being hit either directly or as apart of compound lifts.

Cabinets look beautiful, what did you use to finish them? I need to do something to my MTM kit since the bare MDF is pretty unappealing to look at.

Do you do any isolation workouts? Concentration curls with usually a fairly manageable weight high reps has done wonders for me, preacher curls, Standing One-Arm Dumbbell Curl Over Incline Bench, and sometimes the curl machine are by far my favorite bicep workouts. The biggest change for me was instead of doing the typical body builder split I went to doing body parts twice a week, one day doing barbell workouts and the other day doing dumbbell workouts.

Do more, mine are slowly growing. I do Descending reps and ascending weight. So usually 14-12-10-8-6 till I get to muscle failure.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Have you checked the power to the compressor? We had one go bad in my friends car because of a bad connection so it pulled a ton of current and just burnt up.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 depending on what it is you can always fabricate something, someone who can weld would be a plus

Here is what I did in my TB, managed to fit a group 31 up front.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Do you have room to lay a group 31 or similar on it's side?

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 The Rockford PBR500X1 is an excellent amp, tons of power in a very small size. I've installed tons of them and haven't had an issue with them. The older series used to run pretty hot but never shut off or went into protect.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 I'm considering Westone and JH at the moment. As for how will I know, I wont, but I think you understand my frustrations. The whole thing feels like snake oil to a certain extent. Have you tried the Comply foam tips? They're unfortunately disposable but everyone I know that uses them love them.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 4 years and tons of nicks and dings in the vinyl. It's too hard to re wrap a car by yourself, so I plastidipped it.This was my first try at it. I've seen shops lay it down a lot smoother. I'm just a noob. brb coming down to Texas for you to do the TB

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Upload them to www.imgur.com and use the link.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Thats what I was thinking. But the cheaper ones aroung a grand or so look kinda cheap I would say Panel saw is the best option, the one in our shop isn't exceptionally great but it does a great job. This is the one we use in our shop, We extended the sides out so we could cut even larger panels since we buy extra large sheets of MDF. http://www.northerntool.com/shop/tools/product_200193574_200193574?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Power%20Tools%20%3E%20Woodworking&utm_campaign=Milwaukee&utm_content=M0238&ci_src=17588969&ci_sku=M0238&gclid=CjwKEAiA3Ou1BRDso5XyhduuwFASJABP3PEDs7tDx5oOgGJeTCDcvjFWXNhKjeVfT50Yvu4GmFUOnhoCD1Hw_wcB Is there a way to measure on that one or do you just make a line on the wood and line it up Ours had a tape measurer on the bottom so we would just slide it to the given measurement and chop down.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Thats what I was thinking. But the cheaper ones aroung a grand or so look kinda cheapI would say Panel saw is the best option, the one in our shop isn't exceptionally great but it does a great job. This is the one we use in our shop, We extended the sides out so we could cut even larger panels since we buy extra large sheets of MDF. http://www.northerntool.com/shop/tools/product_200193574_200193574?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Power%20Tools%20%3E%20Woodworking&utm_campaign=Milwaukee&utm_content=M0238&ci_src=17588969&ci_sku=M0238&gclid=CjwKEAiA3Ou1BRDso5XyhduuwFASJABP3PEDs7tDx5oOgGJeTCDcvjFWXNhKjeVfT50Yvu4GmFUOnhoCD1Hw_wcB Is there a way to measure on that one or do you just make a line on the wood and line it up Those things suck unless you have to process a lot of wood in not so accurate format. You need a cabinet saw. He said he wanted to be able to cut down full sheets, a table saw isn't really practical or safe. When building a box I would cut within an 1/8th of an inch and then use the table saw to finish off to the final dimensions.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Thats what I was thinking. But the cheaper ones aroung a grand or so look kinda cheap I would say Panel saw is the best option, the one in our shop isn't exceptionally great but it does a great job. This is the one we use in our shop, We extended the sides out so we could cut even larger panels since we buy extra large sheets of MDF. http://www.northerntool.com/shop/tools/product_200193574_200193574?cm_mmc=Google-pla&utm_source=Google_PLA&utm_medium=Power%20Tools%20%3E%20Woodworking&utm_campaign=Milwaukee&utm_content=M0238&ci_src=17588969&ci_sku=M0238&gclid=CjwKEAiA3Ou1BRDso5XyhduuwFASJABP3PEDs7tDx5oOgGJeTCDcvjFWXNhKjeVfT50Yvu4GmFUOnhoCD1Hw_wcB

Honestly? For full sheets whats best is going to be a panel saw. You can make rough cuts on the panel saw then transition to a table saw or skill saw. Unless you have a VERY large table saw table cutting full sheets is not really safe or feasible.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 His name on facebook is Ryan Miskin.

I'd love a WRX STI but for some stupid reason Subie killed the hatch model so that is a no for me.

Yeah that's probably it, I think sticker my car was 25-26k. I'll definitely think about it, I'm not quite sure what I want to do right now and it also depends on my next assignment after Afghanistan.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Really? Wow I bought my '11 right when It first came out so that might be the case and that was on the A plan.

Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 323 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 326 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 327 Warning: Cannot modify header information - headers already sent by (output started at /home/soundsol/public_html/forum/ips_kernel/classAjax.php:1) in /home/soundsol/public_html/forum/ips_kernel/classAjax.php on line 328 Hmmm... Why do you want to get rid of it? Family works for ford so the discount would be Semi Ok.. I think when I bought my '11 I got 1-2k off.

Would prefer the practicality of the RS but damn the new Mustang GT look great plus more performance for around the same price.

i REALLY like the 2016 Focus RS, but DAMN 36k base is pretty nuts.

Contemplating getting a new car when I get back from afghanistan, something sporty, maybe used...