dpc69ss

I'd like one of these too. Anyone heard from Mike?

I'd like one of these too. Anyone heard from Mike?

I'd like one of these too. Anyone heard from Mike?

Four Z15's and two SAZ-1500d's

Money sent for four d2s. Thanks!

Looking for four D2s, still available?

Quick help needed please... I have a 2.35 cubic foot enclosure for 4 E8's powered by an SAE 1200. I'm going to use a 6" port, can't make my mind what to tune it to 30-35 hz. Is a 6" port, 28.26 sqare inches to much port area for this combo? I see people using a single 6" port for up to 4 cubes. I'm a little worried about the subs unloading and damaging the suspension.

Shirts still available? I'm having a hard time deciding on a small or medium, I'm 5'8" and 150 pounds. I hate buying clothes online because they never fit. Let me know, looking to get one. Thanks.

Box outer dimensions (.75 mdf) - 40" x 13.75" x 8.5" = 1.91 cubes After subs, ports and bracing = 1.65 cubes Box will house four E8's firing up. I have 10' of 2" pvc so I'd like to use it since it's free. Will two 2" ports 8.56" long tuned to 34hz give me good output? Also I have a choice of firing the ports down or to either the driver or passenger side, do not have room to fire up with subs. Give me your thoughts please on this design. Power comes from a Sundown SAE-1200D = 1200 watts @ 1 ohm @ 12.8 volts. Box will be behind the seats, raised off the floor, in a small MR2 with about 30 - 35 cubic feet of interior volume.

Just need to know the displacement of an E8. Thanks for any help.