wutang512
-
Content Count
284 -
Joined
-
Last visited
Posts posted by wutang512
-
-
yeah i seen that thread too when i was going through there forum.
Seems like the ssa and sundown brands have alot of haters on that forum.
seen a dude shit on the xcon saying it was a sub standard subwoofer that wasnt worth the money being asked for it. Needless to say i laughed and went to searching for good sales again
1 -
Hi so I am currently setting up my first system for my 09 corolla. I'm trying to choose between the Q15 or BL15. I know the Q is more SQ and the BL is more SPL but....
Which would be better for a daily driver listening to Hardstyle, Dubstep, Techno, Hiphop. I do want it loud but don't want distortion.
The Amp would be a AQ1200
Thanks
BL
0 -
go to knukonceptz for your wiring they some of the best prices around for 4 and 0 gauge amp kits
0 -
for those prices i could get a PSI Sub that would hit way better
0 -
i dont think its clipping i think it bottoming out. that amp doesn't have a adjustable subsonic filter its fixed at 15hz. So i think its time for you to get an adjustable subsonic filter
0 -
I got a question can anybody explain to what time alignment does and how does it effect the sound of your music?
Also how would you go about doing time alignment manually with the 9887?
0 -
car looks great man.
Wish my father was into cars and car audio like this when i was youner
watch out for that fatmat though. I recently had to call them cause my fatmat extreme has been falling off the doors and melting. Have yet to get a response back from them.
0 -
crescendo audio 3kwp
4k at .5 ohms at 13.8 volts
No amps under 1ohm, but thank you.
well if he can achieve the higher voltages then he can do 4k at 1 ohm 16 volts
but no problem just throwing some ideas out there
0 -
crescendo audio 3kwp
4k at .5 ohms at 13.8 volts
0 -
man those mids look sick.
keep up the good work man
0 -
welcome to the forum
0 -
They take ONE electronic component, put it in a housing, and sell it for 10-100x what that component costs. Nothing hard about just buying said component instead.
i just figured it be more cost effective for me since my amp has a fixed sub sonic filter at 15 hz. They have a f-mod that cut's off everything below 30hz and my box is tuned to 33hz so I thought it'd be perfect. Compared to buying another amp period
If that is all you can get for now until you can get a better external SSF or an amp with a variable SSF then go for it, just my .02
you mean something like this? PFMOD HP-Sub
or something else? which i dont know what that could be...
0 -
For a nice 2 way you could look in to the mli65.
mach 5 audio?
Yup!
their sold out
0 -
For a nice 2 way you could look in to the mli65.
mach 5 audio?
0 -
Midbasses don't work with tweeters unless you have a midrange...
could you possibly go into more depth with this. Cause i was really fixed on a 2 way active set up and i didnt want to cut anymore into my door panels
0 -
They take ONE electronic component, put it in a housing, and sell it for 10-100x what that component costs. Nothing hard about just buying said component instead.
i just figured it be more cost effective for me since my amp has a fixed sub sonic filter at 15 hz. They have a f-mod that cut's off everything below 30hz and my box is tuned to 33hz so I thought it'd be perfect. Compared to buying another amp period
0 -
have you tried ebay? or sonicelectronix or woofersetc?
0 -
Is kerfing for looks or does it actually do something?
0 -
Hi guys,
I've been driving a lot more now and I was looking to get some better sounds since my current set up is factory.
I'm hoping to spend around $600 NZD (~$400 USD) on it all.
Here's what I've been looking at so far
Amplifier
Speakers
and
or
Head Deck Unit
or
or
Please note all those prices are NZD so they will look a bit higher then what you're used to if you're from USA.
If I did get this stuff, would it all work with each other?
My car is a Mitsubishi RVR, and I'm not exactly sure of the speaker sizes, any one know? I measured about 15.5cm for the rear, haven't checked the front speakers because I wanted to see if anyone knew before I removed the panels.
Can a 4 channel amp power 6 speakers total? 4x6" and 2 tweeters?
Any help would be greatly appreciated.
Cheers.
i dont know what size speakers fit your car but for the price of those type s speakers you could find some alpine type r coaxial s and find a type r component set for the same price of that fusion component set.
What kind of sound are you trying to produce?
are you only just looking to replace stock?
0 -
Alright, well it looks like I will go with the alpine. Has anyone ever used Alpines "Imprint" software/mic with their HU's? Does it make a big difference in sound quaility?
i was told on here it was just a marketing scam to basically make you believe you'll get better sound by using "their software".
You can just tune the deck the same way as the software would. I guess it just takes a longer time.
0 -
its a sad day when somebody is trying to charge $1500 for a cap.
Alot of people are really uneducated about what their for.
0 -
DON'T buy an Fmod, they are not the right solution.
whats wrong with a fmod?
0 -
I dont see anywhere on their website where you can buy them
0 -
the type r's were cool i have them right now. but i always get the feeling of what if i would have gotten the type x's.
plus i should have ran them on 100 watts instead of 75
0
Oh YEAH, got my hands on the new Crown Finally!!!!
in Off Topic
Posted
ive been seeing alot of billboards around San antonio about it.
But never tried crown before.