AKMH

Van Ness

What is you put damplifer pro behind every wall in you house and made it leak proof? Sounds expensive but if you were able to pull it off wouldn't it make your house dead silent and possibly more fire resistant?

I got a Memphis M3 10 (2008) and its def. blown but it still barely vibrates and makes the faintest bass when I turn it up. What does that mean? I already ordered a recone so I was just wondering if it would be possible to fix? The coil looks fine and both terminals still have the correct resistance. Tinsel looked okay but I didnt really look that good due to it being a bulky 10 so its hard to see anything. Anybody know what it might be and how to fix it?

did they looked fine. dont matter i got the recone kit and now it works so it must of been blown..

Whats the most valuable part of a subwoofer besides the magnet?

So do you use a jig saw free hand or a table saw for big cuts a jig for small cuts? How many years have you been doing this? I'v never seen boxes of this quality lol. And what do you use to cut the mounting holes?

I say if your not in a neighborhood bump the bass, most people are use to it and the people that bitch about just dont understand. Although it is rather fun to make fun of gangsta people who drive around with all their windows so theres no way you cant hear everything lol.

They are exactly the same as the previous models except i think the crossover is high quality. (dont quote that) I have the pro 50s and they get really loud. They dont pump out alot of midbass, more just mids. They rattle the s**t out of my side view mirrors. I have them on a alpine pdx 150, decent amp not a lot of distortion so it pushes them well. They have really clear sounding tweets. I got them for $300 from crutchfield. Whats nice about them is the only speakers that actually sound leaps and bounds better are $1000+ components and 3 and 4 ways.

Really any 15s, whether they be crap or good, will get loud enough for most people. So must be that amp

You cant even buy a BTL 18 for $350 new, there has to be a catch... guy selling, "BTW all the stuff is blown lol but you can send then amp in a buy recone kits for like $200", HEAD ACHE. I have a car for sale, it has no ignition but still works lol wanna buy it (dont drive through cali though lol)

Yea that would be way more cost effective them $5000 worth of damplifier pro. I like that THX certified drywall. I would like some THX certified car insulation...

Yea but heat insulation isnt exactly made for sound insulation. It would help better than nothing but not like true sound insulation would.

You have to stay on topic now, what are you DoInG?!?! You can't trail off topic and try to help him or else you'll be asked to stop helping him forever.... F**k you dude. Your just sour cause I told you off.

If you can buy off of ebay you can buy off of ficaraudio.com You could get one fi q 15 for $270. Seriously what can you get on ebay that is so much better then that?

Thanks for answering the question lol unlike some other people (shizzzon) Well I dont know I tried the one that is working and another working 10 on the same wires even though I knew my wires were fine.

Well I had my settings correct for what music a normally listen to (metal) But when you turn on Kanye's new album (pretty sure they f'ed up the mastering) But turn it on when I have the other settings at the same volume. I realize that clipped signals dont blow speakers Could we stay on the subject of my blown sub and why its not working please and not on a contest to see who thinks they know more...

Well when it blew I was feeding it 1250 rms off a Cadence DCA 2500. Each was getting that but only one went. Any body else notice that Lovelock Down kills equipment? Iv had that song kill 1 amp and one sub. Anyways I think I'm going to cut out the guts of this blown cone.

I see pictures of raw boxes with Fi 15s and up in them and they all have double thick (looks like) 3/4 inch mdf. So is this really necessary? And if it is, what about the sides, do they need to be doubled to? Also whats the best type of bracing to use?

What are thread rods? Pictures? can I get them at home depot?

I remeasured, new box dimensions are 34 x 30 x 17.5 total interior gross is 8.57 cuft. Port is 6 x 16 x 28. 1 cuft total port area. Do I need more port area? Any suggestions, this is my first box for large drivers. what kind of bracing should I use?

I explained port size so ported...

This is the lawn mower I built for a Crutchfield Dream It contest. W7-8, PDX 600 and 150, Pioneer 7000bt, and polk mm 6 3/4s. Optima yellow top 4 gauge wire fused distribution. And street glow Check it out tell me what you like. Its on crutchfield too Also video of build and install.

If you have to ask you would probably be happier with the 15

SO I just got a new amp ( Cadence DCA 2500.1) and Im going to move on from my Memphis M3 10s, mainly because I blew one of them but I want something louder deeper etc... I have a ford Explorer sport trac so that gives you an idea of the kind of vehicle. I want what ever I get to be extremely loud, but of course I want some quality sound in there. I designed a 6 cuft net for the Qs with 1.2 cuft of port area tuned to 30 hz. Or for the BTL 5 cuft net tuned to 36 hz. I seriously cant decide. But if you rec. other subs, the gross cuft of the box really cant go over 8cuft due to space issues ( I would lose 2 seats instead of just one). Any suggestions would be greatly appreciated.

This is why I hate forums. I don't care about ur rules I just want my question answered so I can spend my money on the right subwoofer. Seriously if I get a constructive answer I will just go away.