blkmrideon22s

well i fixed my fuse blowing problem. the guy i got the amp from had 25amp fuses in the amp and when i looked over the owner manual it called for 30 amp fuse. now my amp flicker on and off when the remote wire is hook up and also it makes my head unit flicker on and off to. what could cause this? it never done this with my other amps i had hook up with the same power and ground and remote wire.

I got a sundown saz-1000d in trade.since dont have any subs yet i unhook my four channel amp to see if the amp worked. when i turn my radio on the fuses pop.i only hook up the power and ground the remote wire and the rca up.i was thinking it could be doing this because im using 8ga wire and i have a 80 amp fuse under the hood. when i hook my four channel amp back up to the same wires it works just fine. i went to the part store and to get my fuses and everyone pop on me.i replace the fuse with 25 amp fuses.what could be causing my fuses to pop?

i want one to go with 2 nightshade v2 15's

i was wondering if some know the power handling of these subs. i've been told that they was 750 watts rms and max 2000 watts and ive also been told that they was 1500 watts rms and 3000 watts max. i tried to call bob at american bass but no answer. also i was trying to find out was wold be a good size box to put these subs in.

i have a 91 honda prelude si and im looking to get better sound in my ride. right now i have a eclipse cd5030 headunit and im going to be getting a 2 set of crescendo audio tweeters. i was wondering what would be a good mid woofer or coaxial speaker to use with the tweeters. i listen to all kinds of music but most of the time its rap.

im looking to buy 2 ia subs. i have a ab400.1 and i was wondering which would work best ia sub? i'm going to running 2 ia subs at 0.5 ohms

i think im going to try the death row 15's i hope they can handle 2000 watts each sub

i hope u like ur sub

for daily use and for comp. i have bout 12 cu.ft to work with. i have bout $300 to $350 each sub to work with. my electrical has already been upgrade. the 4 15's was in my explorer

i have a ab400.1 and i have dd1008a and a dd1510 that im going to recone to 15's.im going to pick up 2 more dd 1515's soon.i was wondering if my ab 400.1 is to much power for 4 dd 1515s4? im going to use this setup for daily use and comp use. this setup will be going in a 1991 ford explorer.

My goal is a Daily ground pounder and 150+ in the lanes What are your goals?

I'm looking to buy 2 fi btl 18s I was wondering what options I should get? I'm going to be running 2 memphis mojo 4kw.

well yesterday i went to install my sax 50.4 and the amp turn on but when i hook up my speaker there was no sound. Well then today i went to turn my radio on to power up the amp and it was in protection mode but when i unhook my rca the protection mode goes away but the blue led doesnt light on when i unhook the rca

im using pioneer ts-d1720c with my sax.50.4. i have my tweeters on the 1 and 2 channel and i have my mids on on the 3 and 4 channel. i planning to get a sax 125.2 for midbass speakers. i hope i can find some good midbass speakers http://www.sonicelectronix.com/item_12224_Pioneer+TS-D1720C.html

Nevermind i had one of the crossover set too high. I got everything working! I LOVE sundown amps!

well today ground my wire to my battery so that took care of the rca. Now i still have no soundn when i hook up my subs to the 3 and 4 channel i cant get any bass. so then i hook some speakers up to the 1 and 2 channel and still no sound

i love my sax-50.4 but i would love it evem more if i could figure out all the crossover

i just order me a sax-50.4. i cant wait to get it

i'll be running 2 sundown saz-3000d SPV44 Power Series 660Amp Battery •Provides Solid Power in an Extremely Popular Size •660Amps 5 Second Burst Power •<6mOhms = Fast Power Response •44Ah Rating •Sealed Design Can Be Mounted In Any Position •Use with or without Included Battery Posts Spv70 Power Series 1050Amp Battery •Heavy-Duty Battery with Great Reserve Power •1050 Amps 5 Second Burst Power •<5mOhms = Fast Power Response •70Ah Rating •Sealed Design Can Be Mounted In Any Position •Use with or without Included Battery Posts •Includes Protective Steel Case •1 Year Replacement Warranty

i plan to run 6000 watts and i was wondering which one would be better? 4 stinger sp44v or 2 stinger spv70 these will be rear batteries. http://stingerelectronics.com/produc...=35&ParentID=1 http://stingerelectronics.com/produc...=35&ParentID=1

i have a d1 nightshade 15 and i was wonder if i could use one sae-1200d to each coil? if so would i wire each coil at 1 ohm?