1mtx1
Members-
Content Count
32 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by 1mtx1
-
ok i got everything goin good, i get a some drops here and there but all is good. for those that said i should do the big 3, i know what that is i upgraded my grounds with 1/0 and that helped alot. i really like the mag and im very happy to have this sub. so many people have audioque ,fi sundown, mtx, kicker etc but i get to have a sub not many have. i had a friend of mine check out my set up today and said it moves more air then my 15inch ssd, 3 12s pretty much any setup in the past 6 months in my new car. im gona buy a truck soon im waitin on my back disabilty money . i might do a 4 15s tune low.
-
any one ever use a 12insh si mag claw? i have one that is a v1 with a v3 soft part recone. it has not seen power. i have a box allmostrdone. its 2 cubic feet net tune to 32 Hz. i have a audioque 1200d. s hity sealed box keeping my sub safe.lol
-
the dmm way is ass, , what if i want 900rms. thats 30.0 but if im geting voltage drops u will f things up. u need 2 dmm's one on the speakers and one on the + and - of the amp.
-
if i see low voltage with my lights on im going to back off on the gain. i allways set it with the lights off. when i turn the lights on the voltage drops. so pretty much u guys think i should set the gain with my lights on my car
-
u think it will move some air in a 03 tiburon gt hatchback? i had a fi 15inch ssd, i all so had a 12inch l7, audioque 15inch 2.5 and 3 12s sealed. with the aq 1200d if i put my lights on and set the gains and if im geting bad volt drops would that b a good way to set the gain. i dont wana f the sub up. i have a extra batt.
-
cool. rangers ftw
-
its old news.
-
you need a dmm to check the ohm at the amp, and u need a dmm to set your gain the RIGHT way.u can use a 50 hz test tone and u can even do this with out havin your subs connected.most people can do it by ear and some amps will let u know if your cliping the hell out of your amp. Audio q amps have that. And do u have any kind of bass boost on as far as your deck setings go?Or even a loud seting on u dont wana use any of that stuff try to keep it flat as possible.
-
I have a few questons i would like for you to answer bro, it will help every one out for sure 1. What ohm sub's do u have and how are they wired?( you can check the ohm load with a dmm you put the + on the + side of your amp and the - of the dmm on the - on the amp)ps its a up side down u on your dmm and put it at the lowest number it might say 200k or so 2.What radio do u have, is it 2 volts or 4 volts that will effect how your gain should be set 3. The shop you went to do they know about fi subs Here is what i think they wired it up put it in a box to small , turned the deck up and said ok ok ok turn the gain up ok thats good. i would like to know on a side note do they do big jobs or do they try to sell there own subs ( jbl kicker mtx you get the idea) One last thing its not a shoot at you but bro come on you paid all this money and you have no idea wtf is goin on. You have to get your sh it together i doubt Fi will do anything for free for u cuz u have no info to give them. You might need a recone bro good luck.
-
15" FI BTL's Rookie question's..... Help appreciated!&
1mtx1 replied to dsm2nrs1's topic in Subwoofers / Speakers
As far as the sundown amp goes it puts out its rated power at 12.8 volts. So if you can keep your volts above that then u will see more power. i have a sundown 1200d and if i can stay above 13.00 volts this amp can put out over 1400 watts at one ohm. u can look in to audio q for your amp if u want u can get to 2200ds . i think there 379 shipped each. http://www.audioque.com/aq/AQamps2200D.htm -
15" FI BTL's Rookie question's..... Help appreciated!&
1mtx1 replied to dsm2nrs1's topic in Subwoofers / Speakers
As far as box goes i would tune to 35 Hz, and i know you seen a few vids etc but i hope u know u will need 1/0 ga wire, big three done in 1/0 ga wire. u will need a front batt and a back batt . i would look in to Powermaster for your batts. If u can stay over12.8 u should be good as far as voltage goes if u cant then u will need a Ho alt 200+amp.For a daily set up i would send 1500 to each sub but if u are ready to buy a Ho alt and a few batts then i would send a soild 2000 watts to each sub all day. oh yea u will need to deaden your ride u will need to brace your ride. I know u see the videos on youtube and it looks cool but man it takes a lot of money to get everything right. for your own good dont think your stock alt and one batt will b ok cuz it wont b ok lol. good luck and have fun. -
tune a little bit higher, i would tune to 32-34 hz u will like that much better. u will hit the higher bass much better and still be able to hit the lows. how do u have your subsonic set? u really dont wana set it much lower then what your box is tune to. right now im tune to 35 hz and im at 32 hz for my sub sonic.
-
u can look in to a ac mic. it can be a few db's off.
-
i got the box down pretty good, one bracket might need to be redone it is not to as good as i would like. The screws would not go threw the metal to good i did get it threw but not all the way. but when i lift the box well when i try to lol it goes no where. the wood under the box does not lift up. i think i should be good now im just waitin on my sub. it was gona be here monday but i checked it last night and it now says wen or thursday it should be here next week. i have my box ready i fixed up a few spots and now im ready to go. im gona look for a new front batt in the next few days. when i have it all goin the way i want ill post up some vids and pics for you guys to see.
-
im headin out to the store tomrrow to get some stuff well im there i wana pic up some new screws that will keep my sub down nice and thight. i did not go with a dubble baffle and with my new 15inch ssd on its way, i wana make sure that my sub does not lift out. here is the thing my last sub a audioq 2.5 was jumping around pretty hard in the same box the ssd is goin in. Can any one lead me to the right screws so i will not have a issue? I will be bolting the box down better to make sure the box it self is not goin no where as well. thanks guys Joe
-
Well im back smoking i had not smoked in 7 months, i can say what i dont like is that if every one is smoking how would car insurance be effected? I know when im smoking i make sure i have the stuff i need befor hand. I know its way safer to smoke weed then drive then to drink a few beers. I could see the gov say this is what u can sell and this is the grade and put so many limits. then you will have a guy/woman that will sell more or sell a higher grade and cuz some issues between the shops that are selling weed.
-
im just doin one 15inch sub up ports back. i think i have drilling the sub down at this time. im a little nervous if my screws will be long enuff. If i can get it pre drilled and i have to get more scrwes im cool with that. I wish the wood was flush all around that would be easy. when i screw threw the wood there is a half inch gap then u hit the metal and when i start to hit the matle my Lbrakets would lift up .
-
i got some starter screws so i can get threw the metal of my car. here is the issue my trunk has this wood that is not flush with the metal . there is a outher area that has to b lifted up with a few foam peces under the wood. My box has a few L brackets and when i go to screw down the screws dont bite to the metal. i went back to get longer screws and they did not have. so i was thinkin of pre drilling and then send some longer metal screws threw. it might be more work to pre drill but im sure it will work out . if not im gona have a issue how i had it befor the box was moving up and down cuz it was just screwed down to the wood not to the fram.
-
It's plain and simple, screws fail, they WILL fail and they WILL strip the wood. Use T-nuts and bolts. i have had 2 diff subs in my box and the box is like 3 weeks old . ill go to the store and find some t nuts. is this something i should grab a few extra or i should be ok with just 8?
-
Do i have any othere options? im goin out soon to get some stuff and i wana get some screws , what othere screws can i get?
-
i never used them, i heard good and bad things about them. what size?
-
i have a 03 tiburon gt i have a small stock alt and a basic starter battery for now. If i need to get a new front batt i was thinking powermaster .I have used powermaster in the past i was happy with there batt's. I just wanted to make sure the work i have to do to get my box bolted down will be worth it. i wana underpower my sub for some time i hope to not see any issues for the time being. I did not go with a dubble baffle any one think lock tight will work to keep my sub in place? how about diff screws i have allways uses basic wood screws?
-
I have a Fi 15inch ssd d-2 on it's way. I have a sundown1200d, at 1ohm can i send 600watts to the sub?i have 4ga and a stock alt and battery.this is why i wana send unded 800watts.i had a audio q2.5 and at 580 watts iwas seeing volt drops at 12.9.