18" Fi BTL Fully loaded specs???

[revrider1 0]

Ok, i was told i would find them on this site but cant seem to come across them. I was told obviously they were different for the regular 18" BTL. Thanks in advance for any direction of help...

[badasschevillac 0]

what do u mean by specs, do u mean parameters? all the specs are on FI website, and also at the top of the technical section there is the BTL page.

[George 0]

yes the specs are different for the fully loaded motors.

i THINK they posted the specs up for fully loaded btl's a long time ago. im not sure however, and cant find them anyways lol

[ford302redneck 15]

Yes, specs was posted once upon a time.

I remember teh thread.

But I dont know, if it made teh transaction when SSA, moved severs.

[George 0]

here are the old ones. i know that they have the new cooling thing, so they might even be different from these but here is what scott posted

Here are the specs for the current fully loaded BTLs (3rd magnet, high Xmax coil, and full cooling).

BTL12

D1 D2

Dcr .7 Ohms 1.4 Ohms

Fs 37.9 Hz 36.4 Hz

Qms 5.15 5.36

Qes .27 .25

Qts .25 .24

Cms 8.2uM/N 8.2 uM/N

Mms 216 g 234 g

Vas 26.4 l 26.4 l

Sd 480 cm^2 480 cm^2

Spl 89.1 88.7

Bl 16.4 24.6

BTL15

D1 D2

Dcr .7 Ohms 1.4 Ohms

Fs 35.7 Hz 34.1 Hz

Qms 5.71 5.86

Qes .30 .28

Qts .29 .27

Cms 7.6uM/N 7.6 uM/N

Mms 261 g 285 g

Vas 70.1 l 70.1 l

Sd 810 cm^2 810 cm^2

Spl 92.0 91.8

Bl 16.4 24.6

BTl18

D1 D2

Dcr .7 Ohms 1.4 Ohms

Fs 31.6 Hz 30.3 Hz

Qms 6.28 6.53

Qes .33 .31

Qts .31 .30

Cms 7.8 uM/N 7.8 uM/N

Mms 324 g 351 g

Vas 160.7 l 160.7 l

Sd 1210cm^2 1210 cm^2

Spl 93.7 93.5

Bl 16.4 24.6

Note: These will change with the addition or subtraction of different options from the fully loaded versions.