Jump to content
bumpinsubaru

looking to build a 4th order for BTL 18s

Recommended Posts

hey all, i am looking to build a 4th order wall setup in my 88 suburban with 4 BTL UFO pie slug 18s, they will have xmax coils and rig is dedicated SPL/demo.

i would really love to find out what sealed size i need to base my wall off. since i want the bandwidth i am thinking 2:1 ratio. i have a calculated 100cf3 to work with so space is a plenty.. (50.25w x38t x91l) subs will be inverted (motor showing) all on the back wall, loading wall port will be drivers side. untill i find a sealed cf size per sub i really cant do a thing... ready to start buying lumber and resin

Share this post


Link to post
Share on other sites

That'd be a fail. Scrap the idea that a "ratio" is ever a good idea

Share this post


Link to post
Share on other sites

If you have that much space, just go with a flat wall or a clam, BTLs will not fail to put out. I love mine =)

7.5cu a woofer, 120sq of port per and you'll be a wind tunnel.

Share this post


Link to post
Share on other sites

I would be scared to put a BTL in a sealed chamber.
I love those subs : they can be super loud, and still seriously musical and accurate.

It's a pitty they don't make N2's no more.

Share this post


Link to post
Share on other sites

ok sounds like flat wall it is. 30cf and 480sq port. leaves me plenty of space for my amps and batts. i think more batteries are called for!

Share this post


Link to post
Share on other sites

Make sure to take some pictures for the build log :D

Share this post


Link to post
Share on other sites

×