Crescendo Audio

Anyone having a lot of trouble getting through to anyone? I place and order 2 and a half months ago and still havent received anything, tracking number says nothing about items being shipped. Tried calling numerous times and sent so many emails, still nothing. Its become an absolute joke I've paid almost $1000 and dont have any of my items, any help would be great. Tried emailing : international@crescendo, sales@crescendo, they were quick to reply when I needed to know postage but now its impossible to get anything from them.

Hello Crecendo Audio community I am looking to upgrade my speakers in my 2011 NIssan Altima S... I have already purchased a Pioneer AVH-X5500BHS Dvd Head unit and will be installing it soon.. Im pretty sure this unit will have enough settings to configure the speakers properly.. I believe the car has 6 speakers because it is a "S Model". I have read a few different websights on the accual size of the speakers and I believe they are as follows... Front Dash are 3.5"... Front door are 6.5" and the Back Top of Trunk are 6x9's (however I have hurd theyr will acomidate a 6.5" as well) Alot has changed with car adudio in the last 10 years and I'm more a computer and home the…

What size ANL fuse should I put on each side of the BC5500?

Hi there, my name is Jim, and I'm new here. I can install but conceed I know very little about the science of what I'm doing, therefore I'm looking for a little help in optimizing my current project as it is different, and of course budget restricted. The project; I am currently refurbishing a boat, it's a '93, 21' Reinell Sunliner bowrider with Chev.305/Mercruiser I/o. I have a Rockford 15, and a sony xm-405eqx, a Alpine 9886 head unit I would like to use, also a pair of energy 4" coaxials. I am wondering about the Crescendo Super tweeter and 6.5's. Knowing I need more amp as well, at least another two channel. My goal is to fill this boat area with as full spectrum as p…

Should I buy the bc5500 and run my hcca 15.2 at 0.5ohm or just keep my current bc2000 and buy and another bc2000 than run my hcca 15.2 at 1ohm

Does anyone know the internal fuse rating for that amp? Im trying to calculate how much alt and batts i'll need to run four 3500's. Thanks

Is there any direct way to contact Crescendo Audio? I have been dialing and leaving messages, emails and filling out that form for weeks and no answer, and I will really like to speaker to them, what can I do?

I tried contacting the company several times, but I have not received any informationfrom anyone. You can have the email of the head of international sales? thanks

Hey my BC2K just came in today and it looks great. I'm looking to install it tomorrow after work but I'm confused as to how to hook up the amp. I've never owned a mono amp that had more than 2 speaker terminals. I have one 2 ohm DVC sub right now rated at 600 watts and would like to wire it in series to 4 ohms to get the 700 watts of power @ 4 ohms. I undersant I have to wire the sub in series but I don't know which speaker terminals to use. Im also receiving another matching sub soon amd would like to know how to wire them both for the 1100 watts @ 2 ohms when. Please help me out these 4 speaker terminals have me stumped Also, does the bass knob control the gain or doe…

Hello, I was just wondering if there have been any posting of any of the amplifiers tested on a 16v setup. Clamped or not. Just interested what these would do, also, at what voltage will they go into protect. Really interested in the information abover for the 5500 series. Thanks

I'm trying to get a hold of someone at Crescendo to replace the faulty bass knob I received with my 3500D purchased here on SSA a year or so ago. I've sent multiple emails and left multiple voice mails with no response, so I figured perhaps a post here might get their attention. Also, if anyone has working alternate contact info for them that would be very helpful as well.

wondering if crescendo going to have a black friday

Incase you missed it, Mark finished the website and it was launched around 3pm today on the 22nd. Check it out http://www.crescendoaudio.com/

i have to run a line driver to help my low voltage on my rca's from head unit since i have more than one amp.question is ......was trying to find out what max voltage u could use for rca inputs on a crescendo bass clef 3500 .....any help would be apprieciated

Does anyone have any info pertaining to crescendo's backorder? I know people have been waiting several months to get their equipment with no ETA on when they will receive it (including myself). I've been checking the website and the SSA site to get updates and it seems that every time there's been an ETA date posted, it just gets pushed back another month after the date is reached.. I heard crescendo is having some issues in-house... this has me worried, as I have spent over 1k on equipment I haven't received yet. Any info on this would be great, if anyone knows anything. Thanks in advance.

I need experienced help ASAP Please!, 1- I would like to know how can i measure the total rms output of my amp using a multimeter and 2- How many volts could the BC3500 D amp do unloaded(with out the sub connected)? Thank you

I ordered two FT1 4ohm tweeters and two PWX-8in mids 4ohm. Well the 8's that came are 8ohm.....Should I try and make this work or just send back for the 4 ohms? The amp is a Alpine PDX 4.150 and does rated at 4 or 2 ohms.

When the next sale going down

Just bought the crescendo component set and it may sound stupid but i don't know how to hook up the crossovers any help would be appreciated

Im running 2 FI BL 18's with cooling and flatwind coils off an aq 2200d for now. I have 1 xs d3100 in the back now, with another being ordered soon, stock alt on 2012 scion xb now. I havent had any voltage issues now, but definitley getting another d3100. Will this be enough for a crescendo 3500d @ 1ohm? Thanks

Anyway to get specs on these tweeters, just trying to compare them to these JBL P26T tweeters Im looking at as well. I need a new pair and both of these fit the bill right about now, thanks for any feedback.

Hi guys, I want to share with you my future setup and wanted to know if the stock electrical will be able to handle it: I am brand new at this car audio business I crescendo 3500D at 2 ohm -- 1900 W continuous power 1 FI BTL N2 12 running at 2 ohm 1 4 channel JBL 100 W rms each channel 4 jbl 6.5 1 Pioneer 9400 Box tuned to 32 Hz (got the cut sheets from BTL forums) I will be doing the Big 3 I have a 2004 Accord with stock alternator and yellow top optima Thanks guys

Hows it going. I'm looking to purchase the BC2000D to power my 2 12" GCONS @ 2 Ohms. What is the lead-time on this product? Thanks, SnapperKing

I bought a bc2k about 6 months ago and about 1 month ago my bass knob clipping light would work but the stop working till I tapped on it. Well a few days ago it finally stopped working all together. Is that part of the warranty? If not how much would it cost to buy a new one?

Will the bass knob from an american bass ab150 work with my 1000c4?