Test 1, 2, 3...

hey bud. this will be kind of hard to explain, but i made the box that you designed for a magnum15 and im having a bit of trouble. the front piece (im assuming is meant to be 31.75 by 16...fine thats dandy). BUT it seems to me that in the drawing where the front piece meets the port, the two should be flush. well they would be if the front piece was 30.75, not 31.75 (if my math is correct) maybe im wrong so instead of having a 2.5 inch opening ive got a 1.5. maybe you can advise me on this one. i wont cut it an inch shorter until you tell me to. i dont know if its supposed to petrude into the opening or what. so any help ? thanks guy(s)

I need some help figuring out my port lol..... Here are the dimensions... 34x14.5x29 Its roughly 6.7cubes(this is taken with the 3/4 wood thickness). I want it to be tuned to about 41hz(comp box). Can you or someone come up with a port for me? Chris

Okay....so here's the box with the subs installed.....looks pretty tech, eh?

I've got a 93"Ford Probe.And I'am wanting a comp/daily-driver set-up.But,I'am still trying to figure-out what subwoofers to go with?Box-builders my email is: [email protected] or [email protected] My name is Clint

I started the process yesterday of fiberglassing new trunk panels that will tidy up my new install and help hide wires and organize distro blocks, crossovers, etc.

and the winner is....

I just wanted your professional opinion my inverted box design. I was given a suggestion of maybe tunning lower. For 2 Punch HX2 subs.

This one is going in my ride

Hey Gnome.... maybe you can hook me up with some plans. Let me know, via pm. I dont have time to try to make some plans.... i need you to bust out some plans for me... this is for a comp in like a week need it soon. I need you to build me some plans for something around 4.5cubes, maybe 5cubes tuned around 41-45hz... Whats going in it is.... 1 12" XXX powered by 1 RE 35.1. Need these plans by at least saturday. Help a brother out . Comp in a week and i need a box for Street A... wanna go to town lol. Heres the pic

It looks like Kicker is here, and welcome

Gnome seeing ur a box builder maybe u can verify my dimensions,I made a box thats 36 x 13.5 x 15(external).The port is 3 w x 12h x 38L(tuning around 30-32hz?) ,how's this sound to u?...Is the box too big?....I can cut it down from one side but thats it,thanx in advance for ur input!

teste

What type of saw do you use when cutting a sheet of mdf? Also what type of blade do you have on your saw? Would a carbide tip blade on a skillsaw work? I'll be using a skillsaw to cut my sheet of mdf into a couple of smaller pieces, so that I can fit it into my work area where my table saw is, which also has a carbide tip blade on it.. does this sound ok to you? Thanks, -Marcus

Do you have any special tips or tricks for this sub? This is goin in the back of an old vw bug convertible. I plan do do it downfiring and the port firing up for anti-theft/destruction purposes. The box will be bolted down from the inside. About 36 sq inches of port area and 1.5-2 cubes of airspace.

Welcome to the forums nice to have u here.

wowwy

heres my new sig

:brock: :soap: :thud:

Test 1

just a welcome to all the new users who signed up

testing sweetness....

Welcome to your new Invision Power Board! This is simply a test message confirming that the installation was successful. You can remove this message, topic, forum or even category at any time.