Test 1, 2, 3...

Changed my mind, I want to do a middle T-shaped port now. Here are the new specs and diagrams. 3.65cf net per driver, which is within Fi's range of 3-5. Port area is 16.41 in^2 per cf, above the 12-16 recommended by Fi because there are TWO drivers sharing the same port. Modeling with WinISD puts port velocity within the range of the 23-30 m/s I'm seeing with Fi's recommended enclosures, so I think port area OK. Also, I'm going to be using a Sundown SAZ-3500D, so I'll be running with 3500 watts at least, not 3200 as in the thread title. Opinions please before I potentially waste a LOT of money on materials? I cannot change the outer dimensions, that is the max I can possi…

Testing uploading a pic. Geez, you would think that this would be a no brainer for someone like myself that works in IT!

nbcnvcpa href="http://feedads.g.doubleclick.net/~a/QMZq8ObeT5-XLCYKktj-Bn_qZGo/0/da"img src="http://feedads.g.doubleclick.net/~a/QMZq8ObeT5-XLCYKktj-Bn_qZGo/0/di" border="0" ismap="true"/img/abr/a href="http://feedads.g.doubleclick.net/~a/QMZq8ObeT5-XLCYKktj-Bn_qZGo/1/da"img src="http://feedads.g.doubleclick.net/~a/QMZq8ObeT5-XLCYKktj-Bn_qZGo/1/di" border="0" ismap="true"/img/a/pimg src="http://feeds2.feedburner.com/~r/AudioJunkies-Products/~4/r97fn5hfyuU" height="1" width="1"/ View the full article

xx

yep...picked up an old eclipse ti 12...needs reconed. any help? not for sure what i wanna do with it...any ideas? lemme know... wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee

Would a 15" with a good box made form here be able to fit in my trunk casue if not im am just goining to go with a single 12" both are DC lvl 4's

UPS 2nd Day Air ($11.99)Arrival: 8/30/2010 UPS Next Day Air ($19.98)Arrival: 8/27/2010

wow quick sale didnt you just add that today

I know you said these were fairly similar to the Mag V3, how similar are they? I think I may have seen that design before http://www.audiojunkies.com/blog/198/new-s...-prototype-pics

Alright, I've got good news and bad news. Bad news - the belt for my table saw was out of stock and had to be ordered. It will not be in until WEDNESDAY ( F*&^*) and no progress will be made until that belt is on. Ultimate frustration.....I'm just dying to hear this thing. Good news - I'm going to go ahead and post photos of..... Daber Audio ""SQL"" 12 DVC prototype Here it is Does anyone in Central Illinois have a nice table saw that they will let me use to expedite this build?

please delete

What's the intended application? If you're really serious about the best possible sound, be prepared to spend some money and do some serious planning.

.03mH Its not rly a dedicated midrange it is indeed a midbass driver. Without any boost or cabin gain the f3 is 70hz IB. IB this driver has more output with 1 watt of input then the extremis with 1 watt from 15hz on up even though it has a higher f3... so with a little bit of bass boost or a linkwitz transform you can make these extend as low as you want. Simply because the xmax is there though doesn't mean you have to use it, just some people like to listen to their music at rather insane levels... Not to mention you can still run it into xmax even with a 2nd order highpass at 50hz IB with its minimum projected max power. We still have to give it a stress test to fin…

ok the E600 and her, thats all I ask for in life

hey shizzonn do you have any extra volt meters?

Too bad Sundown doesn't have any amps powerful enough...

Is that 4 cubes net or gross? And what are the port dimensions?

THATS WHAT IN TALKIN BOUT! yeahhhhhhhhhh

:finger:

That looks like a DP not a warden, how old is the DP?

I thought these post were supposed to be blocked? Hu Chevy350TPI? for me@

sorry if this isn't the place for this but he said the style alternator that it was built for was the large case chevy alternators. and this bracket is not meant to moutn to the stock alternator it is mean to go on the power steering pump on the lower passenger side of the engine. thanks!

sent you an email.