Test 1, 2, 3...

I can not believe you joined that lame forum just to comment on some pucking dumbass that that pucking retard dumb ass megalo started.. have a great day Z Way to go sundown pissing all the other forums off and still selling awesome amps.

This build log will hopefully provide enough information to those folks who are interested in the SPL-12 for high volume car audio use. The criteria consists of: - Mach 5 SPL-12 wired for 4 Ohm use - 3.8 cubic foot bass reflex enclosure tuned to 46Hz - 2001 Pontiac Bonneville - Crest CPX-3.0 PA amp providing 3000 watts power into 4 Ohms - CD source with all necessary test tones - TermLab ****************************************************** Here starts the frankenbox Frankenbox meet frankendriver Box inside trunk Details Box tuning turned out lower than expected as the impedance measurement shows below. The port tuning ended up being 40Hz and not my expected 46Hz. F…

I rebuilt enclosure twice using only RF 18s and although originally designed for Lanzar subs the box worked beautifully and was most impressive. It is my motivating and driving factor to hear 4 18 Fi SSDs w/ 3-4 times the power of my old system. Not sure why it's not

The BTL is moving but I'm running a 100 amp fuse and it's not popping. Suggested fuse is 300 if I remember right so I figure I might be getting less than 3K. Also the BTL is dual 2ohm? and w/ meter measured 1.5ohms per coil. When hooked up in series (as I was telling my friend "we should get 3 ohms") the meter read 2 ohms.??????????? Maybe another topic but why wouldn't it be 3 ohms? Anyhow Sndwn 3000 @ 2ohms = how many watts. I know that this baby has more and I'm definately pumped on how it looks, sounds, and performs so far. Thanks Jacob by the way. I Love you man in a non gay sorta-way

redirecting accidentally posted same topic twice

You miss counted. hehe. There is no #6

Hey everyone, I'm going to try putting my MAW12 in the back of my car and I'm going to try my hand at building at building a ported box and I'd prefer to make it a rectangular slot ported box for ease of construction. I can make it about a max of 650mm in width 350mm in height and any depth... I'm not concerned much about being able to use my boot for this and after I hear it I might make another box down the track. I'm going to stick to the recommended 51L @ 28Hz so can anyone help me on how long I have to make the port and what area it needs to have. I understand that the port itself detracts from the volume of the box but do I need to concern my self with the port bein…

8) 2x Used SAZ-3000Ds - $800 shipped each / $1500 together * Excellent condition * 1-year warranty I'll get some pictures up later. These are in very good shape.

I'm interested in one of those 1000Ds...

4 15's 8000 watts. 154db on term lab.

what does that meanbottom out? sorry new at this.

Ok, thanks for clearing that up. I give full credit to the man who had it before you. He obviously kept it in original condition. You know who you are - thanks a bunch!! m

Finally... Ok, to set things straight here, this unit was sent to Stratus from someone who promised to perform a full review but never followed through. After several months, I finally asked the man to forward the unit on to him so Stratus could follow through with a proper testing. The pictures Stratus posted warrants clarification so those who read this can fill in the blanks: 1.) The SPL-12 is wrapped in a thick plastic bag with four layers of cardboard that sits over the surround. It is then topped off with a flat cardboard piece to protect the cone. 2.) The SPl-12 comes with an aluminum trim ring for owners to switch out with the rubber gasket. It is normally pl…

sounds like a oxymoron

just wondering what a typical shipping time is to the midwest from mach 5? either from customers or mark. i usually get shipments pretty fast, this one seems to be taking longer. thanks.

Just got my 15" BL two days ago "THNX Scott!" Just wondering your guys opinion on this box design... does everything checkout? I'm iffy about the 3.8ft^3 should i cut it back to 3.5^3 =http://www.subwoofertools.com/forum/ported-box.asp?Ew=33.5&Eh=16.5&Dia=9&Xmax=21&Vd=.18&NumW=1&Vb=3.8&Fb=33&Qts=.40&Vas=81.6&Fs=34.5&CE=1.5 ^Designed by Fargof @ Ca.com

well i'v got 8 x DC sound level 4 12" subs on order 8 1200 rms star sound amps to replace the ones in the pics 210amp alt 10 x 100ah batteries 4 x starsound 6.5" component sets 2 starsound amps for the somponents epic 160 hope you guys like will get more pics and vids when everythings and and running

As it says guys, DC Audio is coming to the UK soon. I will be on here talking to you guys as much as possible to get really "up close and personal" with the product and i am looking forward to some good times with the kit over here in europe. Ta Dave

replies to threads all seem to be condenced again it happened before i managed to fix it after a posting a help thread, i cant find said help thread nor can i remember how to change it and ive tried everything in CP Please help so i can start posting again please

So I got 2 questions about some subs here: 1. What size enclosures are people using for the SPL12? I guess it's almost like a poll but I just want to know. I have a feeling I can get more output out of mine (I'm looking more spl oriented) so I wanna know what everyone else is doing with them. 2. What's the realease date on the ixl-10's? I've been thinking about getting four of em and sending them 750rms each. Any input is appreciated!!

Lots of stuff still for sale!

I always get introule for not keeping good build logs, so here it is. Will try to keep it updated. 12 ft^3 tuned to 18 Hz. 9" diameter port.

sorry re-post ?

PM sent

I have been debating on what to do with the Mach 5 MLi's that I bought. After debating on the decision I decided to try to design a Transmission Line from them . Heres what I came up with. Its a Transmission Line enclosure tunned to about 52Hz. Now I dont know everything about designing enclosures but I read all that I could and tried some things that I thought were a starting point. The box is not nearly finished yet. I still have to add a tweeter, crossover, experiment with stuffing, and put a finish on it. But it is done enough to give it a listen. Listening to I am fairly pleased with the way it sounds. It almost plays low enough to not need a dedicated sub woofer…