General Audio

So i have the old surround coil and spider out, i just need to finish cleaning up the old glue. I dont have aside grinder though like everyone says to use, is there another alternative? something else i could use my recone kit form PAP should be here sometime next week and i just want to make sure everything is cleaned up and ready to go for when it gets here. Thanks everyone.

I had my system installed about 10 years ago and I ve never really been happy with it. I finally have started diving into to the install and am not happy with very much of it as far as quality and cleanliness. I like things to look stealth and very clean. I have been doing a lot of reading and am getting a plan together. You can see what I have now in my sig. I have questions about wiring, sound deadening, component speaker mounting and adapters, and sub and enclosure. Is this the right section for all these questions? Couple questions to start it off...I have a capacitor that I've had about 12 years now. I always thought it was a good thing until I started reading that I…

Well, this Monday I started my first ever fiberglass project. I am making doorpods for my DLS 6.3 3-way component set. I started the back half fiberglass enclosures. These will be part of the the sealed enclosure for the midbass. I utilized the factory 5.25" mounting cup, and filled it to create half of a sealed enclosure. This mount/enclosure used to bolt to the sheetmetal of the door, and the plastic doorpanel is mounted in front of it. Since this mount is being replaced with the rear fiberglass enclosure, I am guaranteed a perfect fit, dont have to cut any sheetmetal, eliminate depth concerns, and will seriously increase the imaging, depth, etc.. I removed the OEM spe…

Anyone still down with reggae and have anything new or old school that the world needs to hear?

Hello Everyone, Just wanted to know if anyone knew how to bypass this HU with a relay or automatically somehow? Or is the only way is to have a toggle switch? Thanks in advance

My girl leased a new Rav4, and looking to make some changes to the factory stereo. Keeping the stock touch screen HU, and want to keep everything as factory looking as possible (drop in speakers, no cutting/custom) in the chance we turn it in at the end. In the title I put "reliable" as, there is a good chance we will buy this at the end of the lease and have it a long time. My back isn't so great, so Id like to do this once, and have it last. I have a couple sets of Crescendo CCX65s that Ive had since 2011. They were only used for about 18-20 months though, (only 4 months amped at 60w). The surrounds are loose, they don't sound as good as they did, there is rust on/aro…

Can I hook up the remote wire on my amp straight to the power wire on my amp?

i was taking my rear deck lid out then i wanted to turn my system on and the subs didnt work...the little blue thin wire came out (the remote wire i think) and i need to know where to put it.its connected on the sub amp i just need to know where the other end goes....im pretty sure it doesnt go on my cap but i dont know alot about that.......thanks guys

So after listening to M5 and a couple other people on this forum who made great points to remove my 6.5" speakers from my rear deck I am glad you guys opened me up to a whole different world of sound in my car. Those 2-6.5" opening allow for so much bass to come through into the cabin of my car from the trunk its ridiculous, more ouput and better sound from my subs was gained. I used to be one of those guys who wanted millions of speakers in the interior of the car no matter where I could put them. I learned that the right placement, power, control(EQ'ing) would make up for more sound than a billion speakers in the ca (one friend used to tell me before I joined this site …

anyway, a little back story, I sold this sub to a friends brother, he brings it back to me and says the sub is blown and figures I could use it. with a little inspection I noticed a few things. the tencil leads were coated in the normal wire cover thingy that some subs use (red and black wires), well, the wires will still pretty much covered, but there are spots that seem to be missing wire cover. and the Positive wire is pulled out of the terminal a little (meaning it needs re-soldered) and this 18 has a dual spider setup right? the top one is glued on a big ring about a quarter to half an inch tall. anyways, the top spider seems to have pulled itself off of the ring pie…

Hello, again. I was just wondering if anybody knew the names to these parts of the car because I need to replace them. The first one is the cover in the back of a sedan (2001 Pontiac Grand Am GT) that has the hole for the seatbelts to come through. Anyone happen to know the name of that? The other one is on the front passenger side. It's the piece most people use to hide their wires. While installing my new system, I broke a clip off of each part so now the pieces wont stay in correctly. I was just wondering if anybody knew the names of these parts so I could purchase new ones. Also, do you think eBay has these? Any help would be greatly appreciated. Sorry if this is con…

I have a 2008 Mustang GT/CS that I'm in the process of installling a complete system in. I'm ordering either 1 or 2 12" SKAR audio VVX's pushed by a AP15001D, with a custom ported box for the lows. I will be running my audio through a Pioneer AVHP3100DVD HU. I want to replace the factory door speakers so that I have the ability for the sound to not get drowned out by the subs. I'm not looking for the bentley of speakers, so I'm going to try and keep a budget of 500$ for a set of speakers for the doors and an amplifer. Mounting location: Front Doors Size: 6x8" Power: In need of amp Budget: 500$ I've never been in anyones car with a proper audio system so I have no refre…

I am making this request on behalf of a customer. He is presently serving in Iraq and under normal circumstances I would ask the customer to provide the measurements of the trunk. The vehicle is a 2002 monte carlo and I am requesting/asking for is the Width, Height and Depth in order to design enclosure to what is recommended or the customers requirements. If anyone would be kind enough to provide the info, I and the customer would greatly appreciate it. Phil Woodlawn Cabinetry

Whats up SSA! In the near future I would like to open up some type of small car audio shop. Start off small and build it up, but what I was wondering is.. Is it illegal to resell brand new audio equipment without being authorized as a dealer? Lets say I buy alot of American Bass subs and resell them for a $30 profit per sub (in example), would it be illegal? Thanks for any input.

I've noticed for some time now that it's complicated to figure out the power for a three sub setup. If you have three 4 ohm DVC subs wired together in series (in think thats right) you get a 2.67 overall ohmage. Now if you have a KX600.1 for 600@2ohms, or perhaps a DX700 for 700@2ohms; how would you figure out how much power the amp would put out at 2.67 ohms? Looking into possibly 3-10" compvrs with that setup. Also, I was looking into a two sub setup with the Brahma 10. I'm thinking maybe a bpx1100.1 to power that setup. This one is more expensive, but alot louder and more SQ. After all that 29mm one way linear xmax sure isnt dissapointing! Both setups would be i…

I haven't installed anything in a year, but my buddy needs an experienced mind. He's got an eighth gen civic si, and would like to replace the stock, 8" sub. He's up for complete removal, since he knows he won't get a true subwoofer-type sound without an enclosure or sealing the trunk. Now, it needs to be extremely stealth (carpeted box, all black, tucked in the corner, no visible wires anywhere). He's dead-set on a type-r and an alpine 500W amp to match. I'll set him up with some black knu wiring, too. Two options I've thought of for the box: -Sealed, cut to the shape of the rear, side of the trunk, carpeted, with a grille. -bandpass, carpeted, ported up and to…

I got the pleasure of hearing Cableguy's truck at USACi World Finals this year. It was great to say the very least. When I first got in his truck, I was expecting to see a processor or a high-end expensive head unit. I saw neither, instead I saw a run of the mill Pioneer H/U and a old looking EQ with a few simple adjustments under it. Soon as I started looking around I started noticing the great craftsmanship in the truck, from the custom Kick panels to house the Blue Car Audio 6.5"s, then the Custom A-Pillar's to house the Blue's Car Audio tweeters. So, I was a little skeptical at first as the only SQ vehicle I had heard prior was a G8 with Focal Utopia's and the Alpin…

So about 4 months ago i bought Two Pioneer TS-d1720c Speakers and i had them wired directly to my headunit, They worked great but everyone told me to buy an aftermarket amp and they will sound a lot better. So about a month later i decided to buy the Alpine MRV-F300 amp to wire my speakers too. I got everything hooked up to the new amp but for some reason i felt like my speakers sound better when they were wired to the headunite instead of the new amp ( //Example// I felt like my bass coming from my speakers sounded a lot fuller when they were wired to my headunite. When i had them wired to my aftermarket amp, The bass was kinda flat) . I asked 100 questions on a few …

you guys think its worth rewiring the factory wires on the door speakers with new 16 or 18g?..do they all have to be wired to the front and then to the back ?..do they have to be wired together on a specific side for noise reduction?..thanks for the help i curently have them wired to the hu will be putting a 100 watts into each of them with a 400.4

So one of my friends is selling his CR-X to one of our buddies. But he keeps bein a prick bout it. So he's gonna sell me his Rex. She's nothin special. its a 1990 Si. Which i'm excited about. But the body is rusted to piss. And she'll need quite a lot of work even to just become road worthy. But she runs. Since i'm wanting to upgrade my truck soon. This will probably be where the Q and aq1200 go to. Maybe something a lil more efficient. Not sure yet. Lemme know what you guys think!! any good places for rex parts or any info really would be great! Thanks!

Will this amp run @ 0.5 ohm daily with: 2 runs of positive in 1/0 4 runs of ground in 1/0 (to the frame) Optima Yellow Top as starter batt Batcap 2000 in the trunk Stock alt (100A) Has anybody ever run this amp @ a 0.5 ohm load?

i'm considering going active with some ribbon tweets, using the xovers on my HU. i just need something with better dispersion, im not completely happy with my regular tweets. i'll most like mount em in kicks. anyone have experience with ribbons? whatre your opinions? TIA.

"Ridin Clean" Custom Auto Shows Presents Ridin Clean Custom Auto Shows April 22nd located at Sound Advice in Tampa FL. at 2905 North Dale Mabry Hwy.. corner of Columbus and Dale Mabry Hwy behind Burger King. The show will feature an Iasca Idbl & Bass Boxing division and a DB Drag & Bass Race division. This event will also feature "Cleanest Domestic Cars, Trucks , SUV's" , "Cleanest Import Cars , Trucks, SUV's", "Cleanest Donk / Classic", "Cleanest Sport Bike / Chopper divisions. All types of vehicles are welcome: Cars,Trucks, Bikes, SUV's, Donks, imports, Euro's, Classic's and more. Registration starts at 9:30am with the show being in full motion…

Ive read alot of people talking about it some argue theres know such thing but... what is rise? how does it affect your system? is there a way to couculate it? is there a free program to help factor it in? i hope this dosnt cause any problems just wanting to learn

Hello! I am lokking for a driver to be used in a DIY homecinema subwoofer. I found the RL-p series very interesting. My room is widht:3.1m,lenght:4.6m,height:2.1m I am planning to use the Behringer EP2500 amplifier.Any comment? ep2500 Which one should i choose? 12" or 15" Closed or sealed? What size enclosure? Is it overkill to go for 2 subwoofers in my room?(then i have to buy 2 EP2500?) Brgds Ivan Norway