General Audio

Here is a couple of my favorite: A$AP Ferg - Shabba Remix ft. Shabba Ranks, Busta Rhymes & Migos http://www.youtube.com/watch?v=YGo9ep68ej8 3 Six Mafia "Late Night Tip" http://www.youtube.com/watch?v=cpk6FTbxvc4

My phone won't let my upload pictures is it just my phone or is something wrong with the website?

I was browsing the web recently and came across this pic on a local shops website here in Fort Wayne. It's their only pic so I'm guessing it's their best work to date. Looks great, huh?

Im trying to upgrade my current system myself. I have a 2002 Toyota Camry with stock speakers(3.5's on the dash, 6x9's on the front doors and rear deck). I have a Crescendo s800.4 which I will be running 2 Crescendo FT1's tweeters(replacing the 3.5's), and 6.5 PWX's(replacing the ones on the front doors). How would i wire them to the amp so i can have them for the front channel as i will have my stock rears running off my deck until i upgrade those down the road. The FT1's are 8ohms and the 6.5's are 4 ohms. My subs will be 2 FI BL's running off the BD2000 from Crescendo.

In trying to fix the wire that comes from the inside of the engine bay fuse box that connects to the battery. For some reason to burn and makes it hard to start my car...would this be from my car audio system or from the wire being loose on the connecting post.

Can anyone point me in the direction of some? Trying to get some ideas for my Pontiac. Need to see what people have put in without tearing out the back seat. I have two 12W7's, two X12's and two Zv4's at my disposal. TIA

Ok so looking for both front door and rear door speakers to match up with a Nendo C1100.4. I'm looking at the CDT audio HD-63 Braxial set (180 RMS) and the HD-61A set (170 RMS). both sets are 6.5" woofers and come with both crossovers and tweeters. Thought of using the tweeters off the rear set (HD-61A)in the front for a total of 4 tweets in the front. Any recommendations? thoughts? Ideas? Is CDT audio a good brand? Is the amp too much for those speakers? Any other companies I should consider to match up with the C1100.4? Also I really want to keep things as factory LOOKING as possible at this time. Minor modding is cool but not really wanting to do glass and the…

First, a little history, it's been about 2 years now that I haven't had subs, I traded in my Chevy Blazer for a leased Cruze, so I didn't put my subs in it, I let my friend use them. Now I no longer have the Cruze, I now own an Impala. The set up I ran in my Blazer was 2 Cerwin Vega S.1000 amps strapped together powering 2 Pioneer Premier Championship Series 12s at 1000wrms a piece. I loved it, they hit harder than anyone elses set up that I knew and they sounded really nice. One of the amps ended up blowing, so I only have one of them now, and the subs are stuck in my buddy's trunk. Now I know 2 Pioneer 12s doesn't sound like it'd be the greatest system in the world, so …

What would you recommend for a sub? Needs to be a 10" 2 ohm. Going into a khaotik box. I am thinking a D4 Dcon.

Any of you heard of this company and if so whats your opinions on them????

OK, I know I'm impatient, and I'm not saying SSA is taking too long, I'd rather wait for something that is going to be this awesome versus them rushing and giving me something that might fall apart. But, I was just curious the average time people waited to get their sub. 21+ days could mean 2 months for all I know. I'm trying to keep myself busy right now getting wires pulled and the box built, and hopefully time will pass faster. I'm just hoping the 14 days i've waited so far means I'm half way done:)

http://sketchup.google.com/3dwarehouse/details?mid=7759f9f654d476def4e0aa63f8d34904 What kind of application could this be used for? lolwut

the following parts are what i have been looking at using in my system, does anyone have any thoughts (good or bad) on the choices here. I have a few amps lying around that all have pass through (eclipse, audiobahn, alpine) so one of them will be used in this configuration for the remaining speakers. 2 JL ZR800-CW 8" midbass driver to be built in a glass enclosure in my lower doors. 2 Hertz ML700 2.75" midranges to be glassed in my extreme upper door and angled at the drivers position. possibly 2 focal or hertz tweets, i have 2 alpine R tweets now that i think work very well so ill start with them and if they work well in this setup then great but if not ill swap to a…

I have 2 orion hcca dul 2ohm on crescendo bc2000. Should i buy another bc2000 or sell the orions and buy 1 zcon 18. My goal is to be able to do hair tricks. Im on i tight budget.

see what answers people come up with OK now i have to pull for 2 amps aka 12 runs what batters do you pull from i have been given 12 different answers and also is this the best way to wire using the chassis

I need help figuring out why there isn't any sound coming from my subs. I found out that there is a rubber piece missing on the inside of the terminals on my amp. Could this be why im not getting any sound and if so what should I do?

I was looking for a volt meter to keep track of the voltage when I get the system installed.

HOW LONG WILL THIS SALE BE GOOD FOR?

Well a "new to me" car and it is a 2006 Infiniti m35. I did not want the damn 14 piece bose system but I found a low millege m35 for a good price and it has it. I haven't listened to it yet (I won't be receiving it for another week or two) but I am assuming the worst from my past experiences with other bose equipment. How much of a pain in the ass would it be to install a head unit in the glove box or center console and maintain the factory dash and steering wheel controls. I really don't want to mess with the dash as it has a 6 disc changer in it and is beautiful as it is. I'm at the point where I may just add a sub if the sound isn't terrible, I can't find anyone who re…

i ordered two zcon 18s and a saz 5000 yesterday im gonna get carboard today and see how much air space I have under the window line and hopefully not have to go much higher and could anyone help with a box design?

I am having a fucktard moment, and have a basic ass question. I have, on each channel, two 6 ohm speakers in series for 12 ohms, and then paralleled to a 2 ohm coil. What is the final impedance? I googled several calcs, and none had options for multiple impedances, save for one, but that one gave some answers that looked completely wrong, as in, the speakers with lower impedances receiving less power.... I'm just double checking that this temporary setup isn't wired to a reckless load, my amp doesn't like going below 4, and the last calc I tried gave me 1.7ohm final. It doesn't heat up, and doesn't cut out....But I'm not trying to learn the hard way.

Does anyone here listen to corridors? My uncle is wanting a system and we are trying to figure out what enclosure will work best. The equipment that will be used is a 10 inch kicker CVR (2010 model) and a jl audio 250 watt 2 channel amp.. lol ..

Sorry!!!!!!!!!

a few days ago it was about -28F outside and i had my radio maxed out from when i arrived at work. when i left i started my truck and forgetting i had the volume up i didnt turn it down before it started to play. i got about 1/4 of a note out of my sub and it stopped playing, tonight i pulled my sub out of its box to find one of the tinsel leads broken in half. i soldered it back together and the sub works now but my amp does not. my KX2500.1 powers on but there is no AC voltage out of its terminals. i assume the sub caused some degree of arcing on the amp. how common is it for subs to blow apart due to cold weather? now obviously my case is max power at very cold temps…